home *** CD-ROM | disk | FTP | other *** search
/ CD ROM Paradise Collection 4 / CD ROM Paradise Collection 4 1995 Nov.iso / os2 / fstar99d.zip / filestar.inf (.txt) < prev    next >
OS/2 Help File  |  1994-08-20  |  309KB  |  2,328 lines

  1.  
  2. ΓòÉΓòÉΓòÉ 1. Using Help ΓòÉΓòÉΓòÉ
  3.  
  4. Help is available for all windows within FileStar: 
  5.  
  6.       Γûá Press F4, then F1 for help with the FileStar Window. 
  7.  
  8.       Γûá Press F1 for help with the active window. 
  9.  
  10.       Γûá Press F1 for help with any dialog that has the user input focus. 
  11.  
  12.       Γûá For help using the Settings Notebook, press F1 with the Cover page 
  13.       selected. 
  14.  
  15.       Γûá Press F1 for help with any selected page of the Settings Notebook. 
  16.  
  17.       Γûá Most dialogs also have a Help pushbutton which will activate the help 
  18.       for that dialog. 
  19.  
  20.  Every help window has a menu bar that contains Services, Options, Help 
  21.  choices. Use the Options menu choices to: 
  22.  
  23.       Γûá Display the table of contents (the titles of all help topics). 
  24.  
  25.       Γûá Manage the table of contents (if there is more than one level of help 
  26.       topics). 
  27.  
  28.       Γûá Display a list of the help topics you have viewed. 
  29.  
  30.       Γûá Display a list of subdirectories that contain help topics in which you 
  31.       can search for a word or phrase. 
  32.  
  33.       Γûá Display the last help topic you viewed. 
  34.  
  35.  The help window contains a Services menu bar choice.  Use the Services menu 
  36.  choices to: 
  37.  
  38.       Γûá Look for help information by searching for words or phrases. 
  39.  
  40.       Γûá Print help information. 
  41.  
  42.       Γûá Copy help information. 
  43.  
  44.       Γûá Open a new help window in which you can display another help topic. 
  45.  
  46.  
  47. ΓòÉΓòÉΓòÉ 2. FileStar General Help ΓòÉΓòÉΓòÉ
  48.  
  49. Installation and Getting started 
  50.  
  51.  Installation and first time start up of FileStar is detailed in Installation 
  52. and Starting FileStar. 
  53.  
  54.  The FileStar Window 
  55.  
  56. Note:   For illustration purposes, the horizontal size of the FileStar Window 
  57. shown is less than the minimum size limit.  This is primarily reflected in the 
  58. reduced width of the Name pushbutton/label/data field and the Message Window in 
  59. the Data Panel. 
  60.  
  61.  The FileStar Window consists of six smaller internal windows as shown in the 
  62. above image.  These windows contain the following: 
  63.  
  64.       Γûá Drive Window   - Contains the drive list for the system. 
  65.       Γûá Directory Window - Contains the directory trees for logged drives. 
  66.       Γûá File Windows (2) - Lists files in the selected directory. 
  67.       Γûá Data Panel     - Displays application data in 11 windows. 
  68.       Γûá Button Bar     - Initiates various application functions. 
  69.  
  70.  Active Window 
  71.  
  72.  One of the six internal windows will normally be active with user inputs 
  73.  enabled. When a dialog window is used it will become the active window. 
  74.  However, most of dialog windows also allow the user to reactivate the FileStar 
  75.  window while remaining in the foreground. It is essential for the user of 
  76.  FileStar to be aware of the active FileStar internal window and to understand 
  77.  that only the active window has the keyboard and mouse input focus. 
  78.  
  79.  The Drive, Directory Tree and File Windows have a highlighted border and 
  80.  titlebar when active.  However, FileStar has two windows, the Button Bar and 
  81.  Data Panel, that use a raised border to indicate an active status.  When 
  82.  inactive, these windows have a depressed border. 
  83.  
  84.  To activate a particular window, single click with the LMB anywhere within the 
  85.  border of the desired window. When using the keyboard, hold down the Alt key 
  86.  and use the arrow keys to scroll through the available windows.  A third 
  87.  option is to select the window desired using the Function Keys.  See Keys Help 
  88.  for additional keyboard information. 
  89.  
  90.  In some instances, it is necessary to take the user input focus from all 
  91.  internal windows and make the FileStar Window itself the active window (one 
  92.  instance is when accessing General Help with the F1 function key).  This 
  93.  cannot be accomplished with the keyboard arrow keys or the mouse.  The 
  94.  FileStar primary window is selected with the F4 function key. 
  95.  
  96.  Sizing the Windows 
  97.  
  98.  The FileStar Window has four sizing options: 
  99.  
  100.       Γûá Normal - Sizeable window with a fixed minimum size. 
  101.       Γûá Swap - Window is reduced to a swap file data window. 
  102.       Γûá Maximized - Standard OS/2 option. 
  103.       Γûá Minimized - Standard OS/2 option. 
  104.  
  105.  The design of the FileStar Window necessitates minimum vertical and horizontal 
  106.  sizes for the primary window.  At VGA resolution (640x480), the window is 
  107.  limited to a minimum horizontal size slightly less than full screen width. 
  108.  The minimum vertical size normally displays about 5 rows of files/directories 
  109.  using the default font. It is recommended that the user increase the vertical 
  110.  size to provide larger Drive, Directory and File Windows.  Use the "drag a 
  111.  border" method to resize the FileStar Window. 
  112.  
  113.  The Swap Window is the FileStar Window reduced in size to where only the swap 
  114.  file data is displayed. 
  115.  
  116.  Four of FileStar's internal windows may be user sized to some degree. 
  117.  
  118.       Γûá The Drive Window is fixed in width but may be resized vertically. 
  119.       Γûá The Directory Window may be resized vertically and horizontally to the 
  120.       right only. 
  121.       Γûá The File Windows may be both vertically and horizontally resized. 
  122.  
  123.  The Directory and File Windows may be "maximized" to the full horizontal size 
  124.  of the FileStar Window by mouse clicking on the window maximize control or 
  125.  double clicking in the titlebar. Another mouse click on the same control or 
  126.  double click in the title bar restores normal window size.  These controls 
  127.  provide versatile window sizing options for these windows, including four 
  128.  levels of zoom; normal, FileStar Window horizontal size, full screen normal 
  129.  and full screen horizontal size. 
  130.  
  131.  See examples of resized and maximized windows. 
  132.  
  133.  Clicking/pushing the  pushbutton (window label for the file size window) on 
  134.  the Data Panel will reset all of the internal windows to the default position. 
  135.  
  136.  FileStar has an optional setting in the Settings Notebook to save the size and 
  137.  position of the FileStar Window and all internal windows on shutdown. 
  138.  
  139.  Moving the Internal Windows 
  140.  
  141.  The FileStar internal windows are not moveable.  The fixed positioning aids in 
  142.  maintaining window order within the FileStar Window. 
  143.  
  144.  Functions 
  145.  
  146.  Presented below are the drive and file functions and capabilities of FileStar. 
  147.  Salient features or limitations are also noted.  Long file names are 
  148.  supported.  Click on highlighted subject for additional detailed help. 
  149.  
  150.  The following functions may be used on individual files or a selected list of 
  151.  files: 
  152.  
  153.       Γûá Copy or Move  (drag/drop or point/click dialogs) 
  154.       Γûá Delete  (drag/drop on shredder, delete with/without confirm dialog) 
  155.       Γûá Change attributes  (Read Only, Hidden, System, Archived) 
  156.       Γûá Change date and time  (last write) 
  157.       Γûá Archive and Extract  (point/click dialogs using InfoZip's ZIP.EXE and 
  158.       UNZIP.EXE only) 
  159.       Γûá Save file list  (saved to ASCII text file FILELIST.TXT) 
  160.       Γûá Print file list  (to printer port) 
  161.  
  162.  The following functions may be used only on individual files: 
  163.  
  164.       Γûá Rename  (long file name entry field) 
  165.       Γûá Print  (ASCII only) 
  166.       Γûá Edit  (ASCII, ICO, BMP extensions using external editors) 
  167.       Γûá Browse  (ASCII, INF, ZIP and 10 graphics file extensions using external 
  168.       browsers) 
  169.       Γûá Execute  (double click EXE, COM, CMD, BAT extensions or use command 
  170.       line dialog) 
  171.  
  172.  The following functions are available for directory operations: 
  173.  
  174.       Γûá Create 
  175.       Γûá Expand  (all directory tree branches) 
  176.       Γûá Delete  (deletes branch) 
  177.       Γûá Rename 
  178.       Γûá Move  (within the drive partition) 
  179.       Γûá Query  (branch summary) 
  180.  
  181.  The following operations may be performed on drives: 
  182.  
  183.       Γûá Rescan  (refreshes directory data in FILESTAR.DAT) 
  184.       Γûá Format  (using PMFORMAT) 
  185.       Γûá CheckDisk  (using PMCHKDSK) 
  186.       Γûá Query  (disk and media characteristics) 
  187.       Γûá Find  (all files matching mask) 
  188.       Γûá Seek  (using PMSEEK) 
  189.  
  190.  Drag and Drop Support 
  191.  
  192.  Drag and drop of files is supported between the file windows, from a file 
  193.  window to it's associated directory tree and to WPS objects that accept files, 
  194.  such as the shredder, printer and certain program objects.  Unlike WPS drag 
  195.  and drop, only selected files may be picked up in a drag operation and the 
  196.  entire file window is an acceptable drop zone. In other words, FileStar does 
  197.  not recognize files in a file window as an acceptable drop target. The 
  198.  implementation enhances moving and copying files between the file windows and 
  199.  the directory trees, albeit at the expense of WPS commonality. 
  200.  
  201.  To perform a drag and drop operation (move is default unless changed in the 
  202.  Settings Notebook): 
  203.  
  204.    1. Select the file(s). 
  205.    2. Pick up on one of the selected files using the RMB. 
  206.    3. Drag to other file window, a directory in the directory tree, a desktop 
  207.       object/folder or the desktop itself. 
  208.    4. Release RMB. 
  209.  
  210.  Holding down the Ctrl key makes the operation a copy operation. If the default 
  211.  operation has been changed in the Settings Notebook to copy, holding down the 
  212.  Shift key will override it to a move operation.  If the default has been set 
  213.  to copy, dragging outside of FileStar causes a reversion to a move operation. 
  214.  
  215.   A second instance of FileStar may be started with drag and drop between any 
  216.  of the four different directory tree and file window possibilities. 
  217.  
  218.  Point and Click Interface 
  219.  
  220.  A single click of the LMB (or keyboard arrow scroll) always points to a drive, 
  221.  directory or file as the object of a menu action. A double click of the LMB 
  222.  (or keyboard Enter) always initiates a drive change (Drive Window), a 
  223.  directory change (Directory Window) or starts execution or browsing of the 
  224.  selected file (File Window). 
  225.  
  226.  Nearly all file and directory operations may be performed using dialogs and 
  227.  the mouse without touching the keyboard.  Path information is passed to the 
  228.  program through single clicking the LMB on directories in the directory tree. 
  229.  The program manages window focus and automatically sets the path of the 
  230.  opposite window as the path for most operations initially if the opposite 
  231.  window is not busy with another operation. The user simply clicks on the 
  232.  directory of choice in the directory tree. If a different drive is needed, 
  233.  activate the opposite window and change that window to the drive of choice and 
  234.  then select the directory. Path information is updated with each mouse click. 
  235.  
  236.  When any multiple file operation is initiated, the source file window is 
  237.  locked to prevent the user from accidentally destroying the selected file list 
  238.  or selecting other menu options. However, it is possible to freely switch 
  239.  windows to set window focus and swap directory trees. The source window 
  240.  remains locked until the user either cancels the operation or the operation is 
  241.  completed. The drive for the source window cannot be changed while the window 
  242.  is locked. 
  243.  
  244.  Context Popup Menus 
  245.  
  246.  FileStar has seven popup menus accessed by clicking the RMB in the hot zone 
  247.  for the particular menu. Location of the context popup menu hot zones is shown 
  248.  pictorially in Where the Popup Menus Are. These popup menus provide access to 
  249.  all FileStar functions and, if the user prefers, both the standard menu action 
  250.  bar and Button Bar may be removed from the window, thereby providing more 
  251.  window area for files and directory data. 
  252.  
  253.  FileStar Messages 
  254.  
  255.  FileStar generates five levels of messages to inform the user of functional 
  256.  information, warnings and errors. See Program Messages for more details. 
  257.  
  258.  Selecting Files for Operations 
  259.  
  260.  Files may be selected either individually or as a list of two or more files. 
  261.  While all file operations may be performed on a single file, operations on a 
  262.  list of two or more files are limited to a subset of file operations. The 
  263.  popup menus for the file windows indicate the available functions for each 
  264.  case. 
  265.  
  266.  You may select files for collective operations individually, randomly or by 
  267.  swiping a contiguous group.  You may select and use either of the two methods 
  268.  that OS/2 supports for multiple file selection. The selection options are 
  269.  accessed through the Window Options popup menu for the applicable file window. 
  270.  
  271.  There is a  pushbutton (label for the Selected Window in the Data Panel) to 
  272.  select-deselect all files in a window.  Additionally, the Ctrl+/, Ctrl+\ and 
  273.  Alt+T  key combinations may be used to select-deselect all files in the active 
  274.  file window.  The Selected Window in the Data Panel indicates the summed 
  275.  allocated size of the selected files in bytes. 
  276.  
  277.  Starting Other Applications 
  278.  
  279.  A LMB double click (or keyboard Enter) on an executable file (file extensions 
  280.  of .EXE, .COM, .BAT or .CMD) will cause FileStar to run the selected 
  281.  executable file with the environment inherited from FileStar. 
  282.  
  283.  A Command Line dialog (which saves the last twenty commands) may also be 
  284.  activated from the file window popup menu, Button Bar or Alt+X key 
  285.  combination. This dialog identifies the type of executable file, inserts the 
  286.  full path and file name on the command line and provides options to run the 
  287.  program full screen or windowed with auto-close enabled or disabled. 
  288.  
  289.  If the Command Line is activated with no executable file selected, it presents 
  290.  a blank command line to the user. The user may select a file after popping up 
  291.  the dialog. 
  292.  
  293.  Browsing Files 
  294.  
  295.  ASCII Text Files.  A LMB double click (or keyboard Enter) on an ASCII text 
  296.  file will launch the browse program entered on the External Programs page in 
  297.  the Settings Notebook (defaulted to E.EXE editor) with the selected file as 
  298.  the program argument. The program tests for a valid ASCII text file. 
  299.  
  300.  Archived Files with .ZIP Extension.  Double clicking with the LMB (or keyboard 
  301.  Enter) on a .ZIP file causes the contents of the archived file to be listed in 
  302.  a ZipData Window (support is limited to those files that are compatible with 
  303.  InfoZip's UNZIP.EXE and ZIP.EXE). 
  304.  
  305.  Image Files.  A LMB double click (or keyboard Enter) with a selected file 
  306.  extension of .BMP, .GIF, .TIF, .TGA, .JPG , .EPS, .PIC, .PCD, .SHW or .PCX 
  307.  will result in the launch of the imaging program entered for external program 
  308.  support in the Settings Notebook. 
  309.  
  310.  Other Files.  A LMB double click (or keyboard Enter) on a file with an 
  311.  extension of .INF results in launching the OS/2 VIEW.EXE utility to view the 
  312.  selected file. 
  313.  
  314.  A LMB double click (or keyboard Enter) on a file with an extension of .MET 
  315.  results in launching the OS/2 PICVIEW.EXE utility to view the selected file. 
  316.  
  317.  The VIEW.EXE and PICVIEW.EXE files must be in a directory included in the 
  318.  environment path (they typically are). 
  319.  
  320.  Editing Files 
  321.  
  322.  An editing operation must be initiated from one of the menus, the Button Bar 
  323.  or Alt+E combination keys. An ASCII text file will be edited using the editor 
  324.  entered as the external program editor (defaults to E.EXE). If a file with an 
  325.  extension of .BMP, .PTR or .ICO is selected, the OS/2 utility ICONEDIT.EXE is 
  326.  started to edit or view the file. These files (E.EXE and ICONEDIT.EXE) must be 
  327.  located in the environment path. 
  328.  
  329.  Other file support will be added and WPS file associations may be included in 
  330.  a future updates. 
  331.  
  332.  Window and Program Customization 
  333.  
  334.  Most user options are accessed through a Settings Notebook and saved in 
  335.  FILESTAR.INI in the directory containing FILESTAR.EXE. 
  336.  
  337.  The FileStar Window may be customized using the OS/2 Color and Font palettes. 
  338.  All window sizing and customization data is saved to OS2.INI on closing the 
  339.  application if the Save on Shutdown checkbox on page 2_1 of the Settings 
  340.  Notebook is checked.  The OS/2 color palette will NOT change the window 
  341.  background or the selected file hilite background and foreground colors of the 
  342.  directory and file windows.  You may change the window background colors using 
  343.  the coloring tool on page 5_1 of the Settings Notebook. 
  344.  
  345.  The FileStar entries in the OS2.INI file may be deleted using an option on 
  346.  page 2_1 of the notebook. 
  347.  
  348.  Keyboard Interface 
  349.  
  350.  The keyboard interface is fully functional in this beta version. It is 
  351.  recommended that you review the Keys Help prior to operating FileStar with the 
  352.  keyboard.  Use of a mouse will greatly enhance your ability to quickly exploit 
  353.  all of FileStar's capabilities. 
  354.  
  355.  
  356. ΓòÉΓòÉΓòÉ 2.1. Installation and Starting FileStar ΓòÉΓòÉΓòÉ
  357.  
  358. Installing FileStar 
  359.  
  360. The manual installation of FileStar is extremely easy.  The files FILESTAR.EXE, 
  361. FILESTAR.HLP and BPMCC.DLL are copied to the directory of choice. It is 
  362. suggested that a new directory be created for the FileStar files, such as "fs" 
  363. or "filestar". The FILESTAR.INF file may also be placed in the same directory. 
  364.  
  365. Alternatively, the BPMCC.DLL file may be put in a directory listed in the 
  366. config.sys LIBPATH statement (such as X:\OS2\DLL) and the FILESTAR.HLP file in 
  367. a directory likewise listed in the SET HELP statement (such as X:\OS2\HELP). 
  368.  
  369. Creating a FileStar Object 
  370.  
  371. It is recommended, but not required, that a desktop object named FileStar  be 
  372. created and used to start FileStar. To create a FileStar desktop object, open 
  373. the Templates folder and drag a program template onto the desktop. It will open 
  374. automatically to the first page of the settings notebook. In the Path and file 
  375. name field, enter the path and file name (i.e. D:\FS\FILESTAR.EXE). In the 
  376. optional Parameters field, enter one or two directories (use full path 
  377. statements such as D:\WHATEVER\THISDIR) that FileStar will read into its two 
  378. file windows on startup. The first directory argument will be read into File 
  379. Window 1 and the second in File Window 2. Leave a space between the two path 
  380. statements. If you leave the Parameters field blank, FileStar will log the 
  381. directory it resides in into both file windows. 
  382.  
  383. Starting From a Command Prompt 
  384.  
  385. To start FileStar from a command line, the command must include a path 
  386. component if the filestar directory is not in the config.sys SET PATH 
  387. statement. To be able to start FileStar from a command line from any directory 
  388. other than the filestar directory using simply "filestar", the filestar 
  389. directory must be in the config.sys path or a SET FILESTAR=X:\PATH statement 
  390. must be added to config.sys. Two startup path arguments may be used from the 
  391. command line. 
  392.  
  393. First Time Start Up 
  394.  
  395. The first time FileStar is started, it will take a little longer than normal. 
  396. Startup time is directly affected by the number of directories/files in the 
  397. startup drives/directories. The first time a drive is read, it is added to a 
  398. FILESTAR.DAT file that is automatically created in the filestar directory. 
  399. Thereafter, the FILESTAR.DAT file is read (for the directory data only), 
  400. instead of the drive, for a speedier startup. When OS/2 performs disk I/O, it 
  401. normally boosts the thread priority and robs other processes/programs of 
  402. computer processor time. Since rescanning is an infrequent process, FileStar 
  403. reduces the priority of the thread that does directory scans to provide a more 
  404. friendly environment to other programs (including concurrent FileStar 
  405. operations). This reduction in thread priority results in slightly longer disk 
  406. rescans or first time disk scans. 
  407.  
  408. Rescanning Drives 
  409.  
  410. There is a drive rescan capability to refresh FILESTAR.DAT for a selected drive 
  411. when required or desired. This FILESTAR.DAT file is automatically updated for 
  412. directory changes made under FileStar but should be refreshed by the user if 
  413. changes are made outside of FileStar, such as extracting files from an archive 
  414. file that creates directories. No damage is done by using an out of date 
  415. FILESTAR.DAT. An error message is generated when attempting to use a directory 
  416. in the tree that has been deleted and new directories created outside of 
  417. FileStar simply do not show in the directory tree until a rescan is performed 
  418. by the user. 
  419.  
  420. When a directory tree is read into memory from either an drive read or reading 
  421. the FILESTAR.DAT file, all directories are read and not just the top level 
  422. directories. This results in near instantaneous access to any directory after 
  423. the tree is displayed. 
  424.  
  425. The FILESTAR.INI File 
  426.  
  427. In addition to the FILESTAR.DAT file, a FILESTAR.INI file is also automatically 
  428. created in the filestar directory on first use of the program. This file is 
  429. used to save the program settings from the notebook and other configuration 
  430. options. 
  431.  
  432.  
  433. ΓòÉΓòÉΓòÉ 2.2. Key Assignments ΓòÉΓòÉΓòÉ
  434.  
  435. Function Keys and Combinations 
  436.  
  437.       F1 - Help for active window. 
  438.       F2 - Select Button Bar window. 
  439.       F3 - Close FileStar. 
  440.       F4 - Select main FileStar window or topmost dialog window. 
  441.       F5 - Select Drive window. 
  442.       F6 - Select Directory window. 
  443.       F7 - Select File Window One. 
  444.       F8 - Select File Window Two. 
  445.       F9 - Select Data Panel window. 
  446.       F10 - Activate main menu. 
  447.       Alt-F4 - Close FileStar. 
  448.       Alt-F7 - Move FileStar. 
  449.       Alt-F8 - Size FileStar. 
  450.       Alt-F10 - Maximize active window if expandable. 
  451.       Alt-Spc - Select System Menu. 
  452.       Shift-F10 - Window popup menu. 
  453.  
  454.  Alt + Arrow Key Combinations (selection is rotary) 
  455.  
  456.       Alt+Up Arrow - Switches to next FileStar window up. 
  457.       Alt+Dn Arrow - Switches to next FileStar window down. 
  458.       Alt+Left Arrow - Switches to next FileStar window left. 
  459.       Alt+Right Arrow - Switches to next FileStar window right. 
  460.  
  461.  Tab Key (selection is rotary) 
  462.  
  463.       TAB - Switches to next FileStar window right. 
  464.  
  465.  Alt + Key Combinations 
  466.  
  467.       Alt-A - Change file Attributes. 
  468.       Alt-B - Browse cursored file. 
  469.       Alt-C - Copy selected file(s). 
  470.       Alt-D - Drive menu selection. 
  471.       Alt-E - Edit cursored file. 
  472.       Alt-F - Find file(s).  Drive or system wide search. 
  473.       Alt-H - Activate Help menu. 
  474.       Alt-L - Presents dialog to filter displayed files. 
  475.       Alt-M - Move selected file(s). 
  476.       Alt-N - Rename cursored file. 
  477.       Alt-O - Activates an OS/2 window. 
  478.       Alt-Q - Query selected drive. 
  479.       Alt-P - Prints cursored file. 
  480.       Alt-R - Presents a dialog to modify directory tree. 
  481.       Alt-S - Presents the settings notebook. 
  482.       Alt-T - Selects/deselects all files in directory. 
  483.       Alt-U - Presents a dialog to unzip selected file(s). 
  484.       Alt-V - View zip file contents. 
  485.       Alt-W - Windows menu selection. 
  486.       Alt-X - Execute cursored file. 
  487.       Alt-Y - Save list of all selected files to disk. 
  488.       Alt-Z - Presents a dialog to Zip selected files(s). 
  489.       Alt-Del - Delete file(s). 
  490.  
  491.   CTRL + Key Combinations 
  492.  
  493.       Ctrl-E - Expand/collapse directory tree. 
  494.       Ctrl-M - Move a directory branch. 
  495.       Ctrl-N - Rename a directory. 
  496.       Ctrl-O - Activates a DOS window. 
  497.       Ctrl-Q - Query a directory. 
  498.       Ctrl-R - Rescan drive and current directory. 
  499.       Ctrl-W - Changes window orientation. 
  500.       Ctrl-Ins - Create directory. 
  501.       Ctrl-Del - Delete directory. 
  502.  
  503.  SHIFT + Key Combinations 
  504.  
  505.       Shift-W - Resets windows to default position. 
  506.  
  507.  
  508. ΓòÉΓòÉΓòÉ 2.3. Popup Menus ΓòÉΓòÉΓòÉ
  509.  
  510. Context Popup Menus 
  511.  
  512. The Drive Window popup menu hot zone is that area anywhere inside the window 
  513. border excluding the title and scroll bars. The menu options are discussed in 
  514. the Drive Window help section. 
  515.  
  516. The Directory and File Window hot zones are anywhere within the window border 
  517. excluding the title and scroll bars and the Data Summary window at the bottom 
  518. of each of these windows.  Both File Window popup menus are identical but 
  519. applicable only to the window accessed from.  The Directory Window popup menu 
  520. options are discussed in the Directory Window help section and the File Window 
  521. popup menu options are discussed in the File Window help section. 
  522.  
  523. Each File Window has a Window Options popup menu accessed though a RMB click in 
  524. the Data Summary window at the bottom of the window.  The options on this menu 
  525. are applicable only to the window accessed from and provide for individual 
  526. configurations of the File Windows.  The window configuration options are 
  527. discussed in the File Window help section. 
  528.  
  529. The Data Panel has a popup menu accessed by a RMB click anywhere within the 
  530. windows borders excluding the push button labels for the Data Windows (these 
  531. push buttons initiate other FileStar functions). The Data Panel popup menu 
  532. options are discussed in the Data Panel help section. 
  533.  
  534. The Button Bar does not have a popup menu. 
  535.  
  536.  
  537. ΓòÉΓòÉΓòÉ 2.4. Messages ΓòÉΓòÉΓòÉ
  538.  
  539. Program Messages 
  540.  
  541. FileStar generates five levels of messages to inform the user of functional 
  542. information, warnings and errors. 
  543.  
  544. Interactive Message Window. - The highest level messages pop up in a modal 
  545. window (user can't do anything else until the user responds to the message) in 
  546. the center of the FileStar Window.  These messages occur when an unexpected 
  547. result has occurred, unpredictable or undesirable results may occur, and/or 
  548. user input is required for how to proceed.  A terse description of the problem 
  549. along with other information, such as the advisability of continuing the 
  550. program, is displayed.  The user is presented push button options for response. 
  551.  
  552. The lowest four levels are displayed in the Message Window located on the Data 
  553. Panel. These are: 
  554.  
  555.    1. Error  - These are messages generated by function failures. The message 
  556.       generates an audible ring sound and normally persists in the Message 
  557.       Window for twice the persistence time set in the Settings notebook. 
  558.  
  559.    2. Warning  - These are messages warning the user of abnormal operation 
  560.       associated with the initiated function and usually indicate the function 
  561.       could not be performed.  The message generates a short audible beep sound 
  562.       and normally persists in the Message Window for twice the persistence 
  563.       time set in the Settings notebook. 
  564.  
  565.    3. Information  - These are information type messages.  The message is 
  566.       displayed for the duration set for message persistence in the Settings 
  567.       Notebook and are silent. 
  568.  
  569.    4. Operation  - These are messages indicating ongoing actions such as 
  570.       "Scanning Drive C:".  They only exist for the duration of the action and 
  571.       are not saved. 
  572.  
  573.  Since the Error, Warning, Information and Operation messages use the same 
  574.  window, they are prioritized in the order presented above.  A higher priority 
  575.  message will overwrite a lower priority messages in the Message Window but not 
  576.  vice versa. 
  577.  
  578.  The Message Window is also used to display the OS/2 swap file data. This data 
  579.  has the lowest display priority and will be displayed only when all messages 
  580.  have timed out and the window is free. The swap file size and free swap space 
  581.  alternate every 10 seconds when the display window is free of messages. 
  582.  
  583.  For the error, warning and information messages, the last ten messages of each 
  584.  type are saved for the session only.  These messages are redisplayable in a 
  585.  Message History Window accessed through the Data Panel popup menu. 
  586.  
  587.  
  588. ΓòÉΓòÉΓòÉ 2.4.1. Message History Dialog ΓòÉΓòÉΓòÉ
  589.  
  590. Reviewing the Message History 
  591.  
  592. Three types of messages are saved. These are: 
  593.  
  594.       Γûá Error - These are messages generated by function failures. 
  595.  
  596.       Γûá Warning - These are messages warning the user of abnormal operation 
  597.       associated with the initiated function and usually indicate the function 
  598.       could not be performed. 
  599.  
  600.       Γûá Information - These are information type messages. 
  601.  
  602.  The last ten messages of each type are saved for the session only. 
  603.  
  604.   To review the messages, select the message type. 
  605.  
  606.  
  607. ΓòÉΓòÉΓòÉ 2.5. Swap Window ΓòÉΓòÉΓòÉ
  608.  
  609. The Swap Window 
  610.  
  611. The Swap Window is the FileStar Window reduced in size to where only the swap 
  612. file data is displayed.  A LMB double click anywhere within the Message Window 
  613. reduces the FileStar Window to the Swap Window size to free up desktop space 
  614. when not in use.  Another double click in the window restores the previous 
  615. FileStar Window size and position.  FileStar is essentially not using any CPU 
  616. time in this mode but is occupying all of its normal memory resources. 
  617.  
  618.  
  619. ΓòÉΓòÉΓòÉ 2.6. Window Sizing Examples ΓòÉΓòÉΓòÉ
  620.  
  621. Resized File Window 
  622.  
  623. Maximized File Window 
  624.  
  625.  
  626. ΓòÉΓòÉΓòÉ 3. Drive Window ΓòÉΓòÉΓòÉ
  627.  
  628. The Drive Window 
  629.  
  630. The primary purpose of the Drive Window is to change drives. It is also used to 
  631. input the drive to be used for operations selected from the Drive Window menus. 
  632.  
  633. A drive search is performed only at program initialization. All drives found 
  634. are listed with A:, B:, C: etc. 
  635.  
  636. Changing drives is accomplished by a LMB double click on the drive letter. 
  637.  
  638. There are identical popup and pulldown menus for the Drive Window. A single 
  639. click with the RMB anywhere in the drive list area of the window pops up the 
  640. menu. A single click of the LMB on a drive letter will input that drive to be 
  641. used for selected menu options without affecting the logged drive. 
  642.  
  643. Menu Options 
  644.  
  645. The Drive Window menu options are: 
  646.  
  647.       Γûá Rescan  -  Initiates a rescan of the selected drive to refresh the 
  648.       drive directory data stored in FILESTAR.DAT. This file is normally used 
  649.       to retrieve directory tree data when changing drives. If the drive 
  650.       directory structure is modified from outside of FileStar, a rescan should 
  651.       be performed if the user is aware of such changes. 
  652.  
  653.       Γûá Query  -  Selecting this option will generate an on screen report of 
  654.       the Drive File System and Media Characteristics for the selected drive. 
  655.  
  656.       Γûá Check  -  This option runs the OS/2 utility PMCHKDSK.EXE on the 
  657.       selected drive. 
  658.  
  659.       Γûá Format  -  This options runs the OS/2 utility PMFORMAT.EXE on the 
  660.       selected drive. 
  661.  
  662.       Γûá Find File  -  Pops up a  File Find dialog that may be used to search 
  663.       all drives for files matching a wildcard name pattern. 
  664.  
  665.       Γûá Find Text  -  This option runs the OS/2 utility PMSEEK.EXE. 
  666.  
  667.  
  668. ΓòÉΓòÉΓòÉ 3.1. Rescan Drives ΓòÉΓòÉΓòÉ
  669.  
  670. Rescan Drives 
  671.  
  672. FileStar maintains a drive's directory data in a disk file named FILESTAR.DAT 
  673. in the same directory as FILESTAR.EXE. The purpose of this is to make the 
  674. retrieval of directory data and the building of a directory tree faster than 
  675. reading it from the drive each time.  When a directory tree is read into memory 
  676. from either an drive read or reading the FILESTAR.DAT file, all directories are 
  677. read, not just the top level directories. This results in near instantaneous 
  678. access to any directory after the tree is displayed. The disadvantage of this 
  679. method is that the tree can be out of date if changes are made to a drive's 
  680. directory structure outside of FileStar. This will occur when installing 
  681. programs, extracting files from an archived file with stored paths and others 
  682. ways as well. 
  683.  
  684. There is a drive rescan capability to refresh FILESTAR.DAT for a selected drive 
  685. when required or desired. This FILESTAR.DAT file is automatically updated for 
  686. directory changes made under FileStar but must be refreshed by the user if 
  687. changes are made outside of FileStar. No damage is done by using an out of date 
  688. FILESTAR.DAT. An error message is generated when attempting to use a directory 
  689. in the tree that has been deleted and new directories created outside of 
  690. FileStar simply do not show in the directory tree until a rescan is performed 
  691. by the user. 
  692.  
  693. To rescan a drive, single click with the LMB on the drive letter, then pop up 
  694. either the Drive or Directory Window menu and select Rescan. The key 
  695. combination Ctrl+R also initiates a rescan. If both windows are logged to the 
  696. same drive and either window is busy with an operation, rescan is not permitted 
  697. and the menu option is grayed out. 
  698.  
  699.  
  700. ΓòÉΓòÉΓòÉ 3.2. Formatting A Drive ΓòÉΓòÉΓòÉ
  701.  
  702. Formatting A Drive 
  703.  
  704. Selecting Format from the Drive Window menu will start the external program 
  705. PMFORMAT.EXE which is an OS/2 utility that is distributed with the operating 
  706. system. It must be located in a directory included in the PATH statement of the 
  707. CONFIG.SYS file. This program may be used to format both floppies and hard 
  708. drives. 
  709.  
  710.  
  711. ΓòÉΓòÉΓòÉ 3.3. Running Check Disk on Drive ΓòÉΓòÉΓòÉ
  712.  
  713. Running Check Disk on Drive 
  714.  
  715. Selecting Check from the Drive Window menu will start the external program 
  716. PMCHKDSK.EXE which is an OS/2 utility that is distributed with the operating 
  717. system. It must be located in a directory included in the PATH statement of the 
  718. CONFIG.SYS file. This program may be used to check the disk for errors. 
  719.  
  720.  
  721. ΓòÉΓòÉΓòÉ 3.4. Query Drive ΓòÉΓòÉΓòÉ
  722.  
  723. Querying A Drive 
  724.  
  725. The disk drive and media characteristics may be queried by single clicking the 
  726. LMB on the desired drive letter, then selecting Query from the Drive Window 
  727. menu. The query report shows: 
  728.  
  729.       Γûá Type of File System - File system driver name (FAT, HPFS, CDFS, etc.) 
  730.       Γûá Device Description - Type of drive (Floppy, Fixed Disk, etc.) 
  731.       Γûá Device Location - Remote or local 
  732.       Γûá Removable Media - Yes/No. (ex. Floppy or CD is Yes, Hard drive is No). 
  733.       Γûá Total Space - Bytes - Disk space in bytes. 
  734.       Γûá Volume Label - Volume label if labeled. 
  735.       Γûá Change Detection - Indicates whether or not the drive detects removable 
  736.       media changes. 
  737.       Γûá Support for > 16MB - Indicates whether or not your disk system uses RAM 
  738.       greater than 16 MB. 
  739.       Γûá Media Characteristics - Media data. 
  740.  
  741.  
  742. ΓòÉΓòÉΓòÉ 3.5. Finding Files ΓòÉΓòÉΓòÉ
  743.  
  744. Finding Files 
  745.  
  746. A search of selected drives for files matching a file mask may be performed by 
  747. using the File Find dialog. The search is quite rapid. At the end of the 
  748. search, the user may easily change to the drive/directory containing the found 
  749. file(s). 
  750.  
  751. To initiate a search, the dialog is displayed by selecting File Find from the 
  752. Drive window popup menu, the action bar pulldown menu or Find on the Button 
  753. Bar. From the keyboard, Alt + F also pops up the dialog. 
  754.  
  755. The first step is to select the drives to search. The available drives are 
  756. displayed in a list with multiple selection enabled. Then a filename or 
  757. wildcard filename is entered in the Find Criteria entry field. Push the Find 
  758. pushbutton to initiate the search. 
  759.  
  760. At the conclusion of the search, all files found matching the find criteria are 
  761. displayed in a list which includes the path.  The total number of matches also 
  762. is shown. Pushing the Erase pushbutton (which appears when the search is 
  763. complete) erases the list if another search is desired. Double mouse clicking 
  764. on any directory path displayed in the list will terminate the File Find dialog 
  765. and log the user into that directory. 
  766.  
  767.  
  768. ΓòÉΓòÉΓòÉ 3.6. Finding Text ΓòÉΓòÉΓòÉ
  769.  
  770. Finding Text 
  771.  
  772. Selecting Find Text from the Drive Window menu will start the external program 
  773. PMSEEK.EXE which is an OS/2 utility that is distributed with the operating 
  774. system. It must be located in a directory included in the PATH statement of the 
  775. CONFIG.SYS file. This program may be used to find both files and text in files 
  776. on all drives. 
  777.  
  778.  
  779. ΓòÉΓòÉΓòÉ 4. Directory Window ΓòÉΓòÉΓòÉ
  780.  
  781. Directory Window 
  782.  
  783. The Directory Window contains directory trees for both of the currently logged 
  784. drives.  Tree switching is automatic upon switching active file windows.  Only 
  785. the active file window directory tree is visible. The title bar displays the 
  786. current path for the active file window. 
  787.  
  788. Mouse users simply LMB (Left Mouse Button) double click on a directory to read 
  789. that directory's files into the associated file window. Keyboard users must 
  790. arrow scroll to the desired directory and press ENTER. 
  791.  
  792. A LMB single click, or keyboard arrow scroll, hilites a directory but does not 
  793. cause a directory change.  In this manner, directories other than the logged 
  794. directory may be selected for others various menu selections.  The popup or 
  795. action bar menu selections are therefore applicable to the hilited directory, 
  796. and not necessarily the directory displayed in the active file window. 
  797.  
  798. The Directory Window cannot be moved but may be resized with the mouse in the 
  799. up, down and right directions.  Double LMB clicking in the title bar will 
  800. expand the window to the horizontal size of the FileStar Window.  Another 
  801. double click will restore it to normal.  The window may be expanded and 
  802. restored only. It will not minimize.  It does not expand in the vertical 
  803. dimension, leaving the Button Bar and Data Panels viewable. 
  804.  
  805. Displayed at the bottom of the window is the total number  of directories on 
  806. the current drive. 
  807.  
  808. There are two pushbuttons  located at the bottom left and right corners. These 
  809. pushbuttons select File Windows 1 and 2 respectively. Although the file windows 
  810. may be activated by simply clicking anywhere within the desired window, there 
  811. are some dual window operations where the use of these buttons is either more 
  812. desirable or required. 
  813.  
  814. Normal Operation 
  815.  
  816. The directory tree is not fully expanded by default.  Expandable directories 
  817. are indicated with if collapsed and if expanded. A single mouse click on any or 
  818. will expand/collapse that directory. 
  819.  
  820. A single mouse click in the Data Window at the bottom of the window will cause 
  821. the hilited directory to scroll to within the visible window if it has been 
  822. scrolled out of view with the scroll bar.  This same feature is also applicable 
  823. to the file windows. 
  824.  
  825. The Directory Window popup and pulldown menu options are: 
  826.  
  827.       Γûá Rescan - Rereads the selected drive and updates the FILESTAR.DAT 
  828.       directory file. 
  829.  
  830.       Γûá Expand - Fully expands or collapses the directory tree, depending on 
  831.       the current state. 
  832.  
  833.       Γûá Move - Activates the  Modify Directory dialog with the input focus in 
  834.       the parent directory entry field and the selected directory set in the 
  835.       current directory entry field. 
  836.  
  837.       Γûá Rename - Activates the Modify Directory dialog with the input focus and 
  838.       the selected directory set in the current directory entry field. 
  839.  
  840.       Γûá Delete - If Confirm Directory Delete is checked in the Settings 
  841.       Notebook, activates the Modify Directory dialog with the input focus and 
  842.       the selected directory set in the current directory entry field. If the 
  843.       Confirm Directory Delete option in the notebook is unchecked, immediately 
  844.       deletes the hilited directory but only if it is empty. If files or 
  845.       directories exist in that directory, then an Interactive Message is 
  846.       generated asking whether or not to delete the files and or directories. 
  847.  
  848.       The menus indicate the current status of Confirm Directory Delete  by 
  849.       showing lines above and below the menu Delete item if it is unchecked and 
  850.       a dialog interface (Delete...) if it is checked. 
  851.  
  852.       Γûá Create - Activates the Modify Directory dialog with the input focus in 
  853.       the Create entry field and the selected directory set in the current 
  854.       directory entry field. 
  855.  
  856.       Γûá Query - Initiates a scan of the selected directory for all files and 
  857.       subdirectories contained therein. A Directory Info dialog reports the 
  858.       directory's statistics, attributes and date of creation.
  859.  
  860.  The Modify Directory dialog is always presented for Create, Move and Rename 
  861.  directory menu selections.  This dialog presents a tree view of the selected 
  862.  directory branch using entry fields. The initial input focus is directed to 
  863.  the appropriate field.  The selected directory may be renamed or deleted, a 
  864.  directory may be created as a subdirectory or the parent entry field may be 
  865.  edited for a directory move. For further details refer to Modifying the 
  866.  Directory Structure. 
  867.  
  868.  
  869. ΓòÉΓòÉΓòÉ 4.1. Modifying the Directory Structure ΓòÉΓòÉΓòÉ
  870.  
  871. Modifying the Directory Structure 
  872.  
  873. The Modify Directory dialog displays a limited tree view centered around the 
  874. selected directory. Only the parent and selected directories are displayed. 
  875. These are displayed in user modifiable entry fields, along with an entry field 
  876. for creating a subdirectory to the selected directory. Each entry field has 
  877. action pushbuttons which are enabled/disabled depending on the user inputs in 
  878. the entry fields and the detected existence of files and/or subdirectories in 
  879. the selected directory. 
  880.  
  881. The dialog remains in the display foreground at all times. The user may change 
  882. drives and/or file windows/directory trees as desired using normal procedures. 
  883.  
  884. Moving a Directory 
  885.  
  886. A directory can only be moved within the current partition (drive). To initiate 
  887. a directory move operation, click on the directory to be moved in the directory 
  888. tree. The directory will be displayed in the the selected directory entry field 
  889. (the center field). Modify the parent directory in the upper entry field (by 
  890. typing) to reflect the desired parent directory of the selected directory. This 
  891. action will enable the Move pushbutton which which the move operation is 
  892. initiated.  Do not try to move the directory to a different drive as this is a 
  893. move operation. Moving a directory to a different drive requires a copy 
  894. operation which is a planned enhancement to FileStar. 
  895.  
  896. Renaming a Directory 
  897.  
  898. To rename a directory, simply point to the directory to be renamed (by single 
  899. clicking on it in the directory tree), then modify the name in the selected 
  900. directory entry field. This action will enable the Rename pushbutton with which 
  901. the rename operation is initiated. 
  902.  
  903. Deleting a Directory 
  904.  
  905. To delete a directory, simply point to the directory to be deleted (by single 
  906. clicking on it in the directory tree), then press the enabled delete 
  907. pushbutton. There are three pushbuttons associated with deleting a directory: 
  908. Delete, Delete*.* and DelBranch. They are activated automatically depending on 
  909. the detected existence of files and/or subdirectories in the selected 
  910. directory. 
  911.  
  912.       - If the directory is empty, the Delete pushbutton is enabled. 
  913.  
  914.       - If the directory contains files (but no subdirectories), the Delete*.* 
  915.       pushbutton is enabled and a warning that the directory contains files is 
  916.       displayed. 
  917.  
  918.       - If the directory contains subdirectories, the DelBranch pushbutton is 
  919.       displayed and a warning that the directory contains subdirectories is 
  920.       displayed. 
  921.  
  922.  Pushing the enabled pushbutton will delete the directory along with it's files 
  923.  and subdirectories (if any), depending on which pushbutton is enabled. 
  924.  
  925.  Directories may be deleted without the Modify Directory dialog if the Confirm 
  926.  Directory Delete option is unchecked in the Settings Notebook. However, if the 
  927.  directory contains files or subdirectories, an Interactive Message window will 
  928.  still appear, forewarning the user that files and/or directories will be 
  929.  deleted and allowing the termination of the operation. 
  930.  
  931.  Creating a Directory 
  932.  
  933.  A directory is created by simply pointing to the desired parent directory (by 
  934.  single clicking on it in the directory tree), and entering the name of the 
  935.  directory to be created in the bottom entry field. This action will enable the 
  936.  Create pushbutton which is then pushed to create the directory. 
  937.  
  938.  
  939. ΓòÉΓòÉΓòÉ 4.2. Expanding the Directory Tree ΓòÉΓòÉΓòÉ
  940.  
  941. Expanding the Directory Tree 
  942.  
  943. The directory tree is not fully expanded by default.  Expandable directories 
  944. are indicated with if collapsed and if expanded. A single mouse click on any or 
  945. will expand/collapse that directory. 
  946.  
  947. If Expand is selected from the directory menu, the directory tree fully expands 
  948. or collapses, depending on the current state. The menu item is checked if 
  949. expanded. 
  950.  
  951. There is an Always Expand Tree option in the Settings Notebook that, when 
  952. checked, will cause the tree to always expand whenever a different directory is 
  953. read into the window. 
  954.  
  955.  
  956. ΓòÉΓòÉΓòÉ 4.3. Query Directory Branch ΓòÉΓòÉΓòÉ
  957.  
  958. Querying A Directory Branch 
  959.  
  960. Any directory branch in the directory tree may be queried, including the root 
  961. directory. The above dialog is used to report the query results. The query 
  962. reports : 
  963.  
  964.       Γûá Number of subdirectories in branch. 
  965.       Γûá Number of files in branch. 
  966.       Γûá Number of bytes that the in the branch. 
  967.       Γûá Number of allocated bytes that the branch occupies. 
  968.       Γûá Date that directory queried was created (not available for root 
  969.       directory). 
  970.       Γûá The attributes of the directory queried. 
  971.  
  972.  To query a directory, select the directory with a LMB single click. Then popup 
  973.  the directory menu and select Query from the menu. You may query other 
  974.  branches without closing the Directory Info dialog. 
  975.  
  976.  The directory query capability is handy for determining exactly how much disk 
  977.  space is used by a particular application. 
  978.  
  979.  
  980. ΓòÉΓòÉΓòÉ 5. File Windows ΓòÉΓòÉΓòÉ
  981.  
  982. File Window Description 
  983.  
  984. There are two identical file windows.  For identification purposes, the 
  985. left/upper window is referred to as File Window One and the right/lower window 
  986. as File Window Two. 
  987.  
  988. The File Windows cannot be moved but may be resized with the mouse. Double LMB 
  989. clicking in the title bar will expand the window to the horizontal size of the 
  990. FileStar Window.  Another double click will restore it to normal. The windows 
  991. may be expanded and restored only. They will not minimize. They do not expand 
  992. in the vertical dimension, leaving the Button Bar and Data Panels viewable. 
  993.  
  994. Displayed in the Data Window (located at the bottom of the File Window) is the 
  995. total number of files and bytes for the directory listed in the window. The 
  996. Data Window is the hot spot to use with the RMB to pop up the Window Options 
  997. menu. A LMB click in this window will also quick scroll the cursored file into 
  998. the view of the window if it is not on view. 
  999.  
  1000. Display Options 
  1001.  
  1002.       Γûá Orientation - Vertical or horizontal oriented windows. 
  1003.       Γûá Text case - Mixed or lower case text. 
  1004.       Γûá Views - Text (flowed), Details, Name (flowed), Icon views. 
  1005.       Γûá Selection - Extended or multiple file selection. 
  1006.       Γûá Sort - Sort file list by name, extension, size, date or none. 
  1007.       Γûá Filter - Filters files displayed by attributes, wildcards. 
  1008.  
  1009.  All display options are saved at program termination and restored at next 
  1010.  startup except for the file filter. The file filter is always reset to "all" 
  1011.  files. 
  1012.  
  1013.  Window Orientation 
  1014.  
  1015.  The file windows may be configured vertically side-by-side, or alternatively 
  1016.  over-under in a horizontal orientation. Window orientation is an option in the 
  1017.  Setup popup or pulldown menus. The Setup popup menu is accessed by a RMB click 
  1018.  in the Data Panel. 
  1019.  
  1020.  Each orientation has its advantages, depending on the window view.  When 
  1021.  displaying the text view, more files will be displayed in the vertical 
  1022.  orientation. Swipe selection of files is also easier.  Horizontal orientation 
  1023.  is recommended for the details view. 
  1024.  
  1025.  Text Case 
  1026.  
  1027.  Text in all views may be displayed as either all lower case or mixed case. 
  1028.  Mixed case is however the file name was saved.  Lower case is more compact in 
  1029.  most cases.  Mixed case can be more descriptive, especially when combined with 
  1030.  long filenames. 
  1031.  
  1032.  Views 
  1033.  
  1034.  Views describe how the files are displayed in the window. The window view is 
  1035.  changed by selection on the Window Options popup menu, accessed with a RMB 
  1036.  click in the Data Window at the bottom of the File Window. 
  1037.  
  1038.       Γûá Text - File names are listed in conventional flowed columns of text. 
  1039.  
  1040.       Γûá Details - Files are presented in text columns of file name, size, last 
  1041.       write date, last write time and attributes.  Column titles are selected 
  1042.       as an option in the Settings Notebook. 
  1043.  
  1044.       Γûá Name - File icons and text names are displayed in columns with the file 
  1045.       name to the right of the icon. 
  1046.  
  1047.       Γûá Icon - Same as Name view except the icons are not in an ordered, flowed 
  1048.       list and the name is below the icon. 
  1049.  
  1050.  The design of FileStar was intended to maximize the number of files displayed 
  1051.  in a file window while, at the same time, providing file details for the 
  1052.  cursored file. The text view does just that and is the recommended view for 
  1053.  most occasions. It is the default FileStar view. It is also the fastest view. 
  1054.  
  1055.  Selecting Files 
  1056.  
  1057.  FileStar supports two types of file selection. 
  1058.  
  1059.       Γûá Extended - Permits selection of one or more files in any combination. 
  1060.       When used with a mouse, discontiguous selection of files is possible by 
  1061.       holding down the Ctrl key while selecting discontiguous file(s). 
  1062.       Contiguous files may be selected in a swipe fashion when using a mouse. 
  1063.       If a file is selected without holding down the Ctrl key, the file list is 
  1064.       destroyed and only the last selected file is selected. 
  1065.  
  1066.       Γûá Multiple - Permits selection of none, one or more files in any 
  1067.       discontiguous order.  Care must be exercised in those cases where the 
  1068.       action to follow is intended for only one file to ensure that there are 
  1069.       no other selected files (which may not be in the window field of view). 
  1070.  
  1071.  File selection in FileStar is slightly different than usual in that if more 
  1072.  than one file is selected, the selected file allocated sizes are accumulated 
  1073.  and totaled in the Selected window of the Data Panel. 
  1074.  
  1075.  FileStar supports four ways to select-deselect all files: 
  1076.  
  1077.    1. Selecting Select All, Deselect All for the popup and pulldown menus. 
  1078.  
  1079.    2. Pushing the Selected pushbutton on the Data Panel. 
  1080.  
  1081.    3. The Alt+T key combination. 
  1082.  
  1083.    4. The Ctrl+/ (select) and Ctrl+\ (deselect) key combinations. 
  1084.  
  1085.  Once a file operation is selected, such as Copy or Move, the file window is 
  1086.  disabled to user input preventing any possibility of accidental deselection of 
  1087.  the selected file list. 
  1088.  
  1089.  Sorting Files 
  1090.  
  1091.  Files may be displayed unsorted or sorted by file name, file name extension, 
  1092.  date or size. The sort type selected from the Window Options menu is for the 
  1093.  session only. The sort type selected from the File Filter and Sort Options 
  1094.  dialog is saved at program termination and restored at next startup. 
  1095.  
  1096.  File Filters 
  1097.  
  1098.  A File Filter and Sort Options dialog window may be activated by selection 
  1099.  from the Setup popup and pulldown menus, the Alt+L key combination or from the 
  1100.  Button Bar. This dialog is used to input (and save) wildcard name filters, 
  1101.  file attribute filter and to select a sort option applied to both file 
  1102.  windows. The Setup popup menu is accessed with a single RMB click in the Data 
  1103.  Panel. 
  1104.  
  1105.  File Window Functions 
  1106.  
  1107.  The file functions are selected from either the File Window popup menu, the 
  1108.  action bar pulldown menu or keyboard combination keys. The menu selections are 
  1109.  grouped by applicability to a single file or a selected list of files. All 
  1110.  functions are applicable to a single file. The file(s) for an operation must 
  1111.  be selected before activating a menu. Most selections activate an interface 
  1112.  dialog for the operation. 
  1113.  
  1114.  The menu options for one or more selected files are: 
  1115.  
  1116.       Γûá Copy  -  Activates the  Copy dialog for the user to input the 
  1117.       destination directory. 
  1118.  
  1119.       Γûá Move  -  Activates the  Move dialog for the user to input the 
  1120.       destination directory. 
  1121.  
  1122.       Γûá Delete -  If Confirm File Delete is selected in the Settings Notebook, 
  1123.       activates the  Delete dialog which permits the user to confirm the delete 
  1124.       operation. If Confirm File Delete is not checked in the Settings 
  1125.       Notebook, the file is immediately deleted. 
  1126.  
  1127.       The menus indicate the current status of Confirm File Delete  by showing 
  1128.       lines above and below the menu Delete item if it is unchecked and a 
  1129.       dialog interface (Delete...) if it is checked. 
  1130.  
  1131.       Γûá Zip  -  Activates the  Zip dialog for the user to input the destination 
  1132.       directory for the zip file and it's filename. 
  1133.  
  1134.       Γûá Unzip  -  Activates the  Unzip dialog for the user to input the 
  1135.       destination directory for the extracted files. 
  1136.  
  1137.       Γûá Attributes  -  Activates the  Attributes dialog which prompts the user 
  1138.       to select the attributes to be applied to the selected file list. 
  1139.  
  1140.       Γûá Date/Time  -  Activates the  Change File Date/Time dialog which the 
  1141.       user uses to set the date and time to be applied to all selected files. 
  1142.  
  1143.       Γûá Save List  -  Saves a list of the selected files to an ASCII text file 
  1144.       named FILELIST.TXT in the current directory. 
  1145.  
  1146.       Γûá Print List  -  Sends a list of the selected files to the printer. 
  1147.  
  1148.  The following menu option is applicable only to a file that is both cursored 
  1149.  and selected. Only one file in the window can be cursored and have selected 
  1150.  emphasis: 
  1151.  
  1152.       Γûá Rename  -  A long file name entry field is presented in the Data Panel 
  1153.       with the cursored file name ready for editing. 
  1154.  
  1155.       If changes are made in the file name, the Name pushbutton label changes 
  1156.       to Rename which is then used to rename the file. If no changes are made 
  1157.       to the filename, pushing the Name pushbutton or Esc cancels the 
  1158.       operation. 
  1159.  
  1160.  The following menu options are applicable to the cursored file. Only one file 
  1161.  will be cursored and it may or may not have selected emphasis: 
  1162.  
  1163.       Γûá Execute  -  The  Executable File dialog is activated with the cursored 
  1164.       file set in the command line. The file type is identified. Depending on 
  1165.       the type file identified, options to run the file in a window or full 
  1166.       screen and with or without auto-close at the completion of the program 
  1167.       may be enabled. 
  1168.  
  1169.       Γûá Edit  -  Starts the external program entered in the Edit field, 
  1170.       Settings Notebook Page 3_1, External Programs (Path Tab). The cursored 
  1171.       file is passed to the program as the file to be edited. The external 
  1172.       program is defaulted to E.EXE. 
  1173.  
  1174.       Γûá Browse  -  Starts the external program entered in the Browse or Image 
  1175.       field, Settings Notebook Page 3_1, External Programs (Path Tab). Which 
  1176.       program is started is dependent on the file cursored file extension. The 
  1177.       cursored file is passed to the program as the file to be browsed. 
  1178.       Selecting this option from a menu is equivalent to double clicking the 
  1179.       LMB on the cursored file. 
  1180.  
  1181.       Γûá ZipView  -  Activates the ZipData Window. If activated with a cursored 
  1182.       file that does not have a .ZIP file extension, the ZipData Window is 
  1183.       initialized in a create mode. If the ZipView menu option is selected and 
  1184.       the cursored file has a .ZIP extension, the contents of the zip file are 
  1185.       listed in the ZipData Window. 
  1186.  
  1187.       Γûá Print  -  The cursored file is sent to the printer. 
  1188.  
  1189.  
  1190. ΓòÉΓòÉΓòÉ 5.1. File Drag and Drop ΓòÉΓòÉΓòÉ
  1191.  
  1192. Drag and Drop File Operations 
  1193.  
  1194. Drag and drop of files is supported between the file windows, from a file 
  1195. window to it's associated directory tree and to WPS objects that accept files, 
  1196. such as the shredder, printer and certain program objects.  Unlike WPS drag and 
  1197. drop, only selected files may be picked up in a drag operation and the entire 
  1198. file window is an acceptable drop zone. In other words, FileStar does not 
  1199. recognize files in a file window as an acceptable drop target. The 
  1200. implementation enhances moving and copying files between the file windows and 
  1201. the directory trees, albeit at the expense of WPS commonality. 
  1202.  
  1203. To perform a drag and drop operation (move is default unless changed in the 
  1204. Settings Notebook): 
  1205.  
  1206.    1. Select the file(s). 
  1207.    2. Pick up on one of the selected files using the RMB. 
  1208.    3. Drag to other file window, a directory in the directory tree, a desktop 
  1209.       object/folder or the desktop itself. 
  1210.    4. Release RMB. 
  1211.  
  1212.  Holding down the Ctrl key makes the operation a copy operation. If the default 
  1213.  operation has been changed in the Settings Notebook to copy, holding down the 
  1214.  Shift key will override it to a move operation.  If the default has been set 
  1215.  to copy, dragging outside of FileStar causes a reversion to a move operation. 
  1216.  
  1217.   A second instance of FileStar may be started with drag and drop between any 
  1218.  of the four different directory tree and file window possibilities. 
  1219.  
  1220.  
  1221. ΓòÉΓòÉΓòÉ 5.2. Copying and Moving Files ΓòÉΓòÉΓòÉ
  1222.  
  1223. Copy and Move Operations 
  1224.  
  1225. Drag and drop is supported for these file operations. 
  1226.  
  1227. The common procedure for using the dialogs to Copy or Move files is as follows: 
  1228.  
  1229.    1. Select file(s) - Select one or more files from a file window for the 
  1230.       operation. 
  1231.    2. Select operation - Use popup or pulldown action menus, or accelerator 
  1232.       keys. 
  1233.    3. Select target path - If drive is already selected in one of the file 
  1234.       windows, single click in that file window to display directory tree for 
  1235.       that window. Otherwise, read the desired drive into the opposite file 
  1236.       window. Single click on desired target directory in the directory tree. 
  1237.    4. Initiate operation. - Press action pushbutton in dialog window. 
  1238.  
  1239.  The selected operation dialog appears overlaying a portion of the Data Panel. 
  1240.  The dialog contains three data fields. 
  1241.  
  1242.       Γûá The upper field contains the full file path and file name of the first 
  1243.       selected file. 
  1244.  
  1245.       Γûá The middle field summarizes the additional files included in the 
  1246.       operation. 
  1247.  
  1248.       Γûá The lower field, labeled To, contains the target path for the 
  1249.       operation. It is initialized to the path of the other file window. The 
  1250.       target path may be changed by mouse, keyboard or manual input. 
  1251.  
  1252.  The dialog is moveable and may be resized, in width only, to enhance viewing 
  1253.  long paths and filenames. 
  1254.  
  1255.  When the operation dialog appears, the source File Window is locked from 
  1256.  further normal user input until the selected operation is complete or 
  1257.  cancelled. However, you can modify the selected file list by holding down the 
  1258.  Ctrl key and using the LMB to deselect files from the list or select other 
  1259.  files to be added to the list. This is a common feature of the Copy, Move, 
  1260.  Delete, Zip and Unzip dialogs. 
  1261.  
  1262.  Setting the Target Path by Point and Click 
  1263.  
  1264.  The objective of the following cases is to get the directory tree of the 
  1265.  target drive in the directory window. When the correct tree is displayed, 
  1266.  single click on the desired target directory. The To field in the dialog 
  1267.  updates to the selected directory.  The directory tree will not accept double 
  1268.  clicks if it's associated file window is locked. 
  1269.  
  1270.  Target Drive in Use in Opposite Window. 
  1271.  
  1272.  If the target directory is on the drive in the opposite window, click in the 
  1273.  opposite window (or use the directory tree select buttons at the bottom of the 
  1274.  Directory Window) to change the active file window and directory tree to the 
  1275.  opposite window. 
  1276.  
  1277.  Target Drive in Neither Window. 
  1278.  
  1279.  Activate the opposite window (if not in use) and change to the desired drive. 
  1280.  
  1281.  If the target directory is on another drive and both windows are in use, the 
  1282.  full target path must be typed into the target path window. Error checking is 
  1283.  performed on edited paths and filenames to ensure that they conform to the 
  1284.  drive type (FAT or HPFS) requirements. 
  1285.  
  1286.  Initiating the Operation 
  1287.  
  1288.  When the desired path is displayed in the target field, click on the operation 
  1289.  pushbutton (Copy or Move) to start the operation. The selection emphasis is 
  1290.  removed from the files as they are copied and the file is removed from the 
  1291.  window as it is moved.  The window(s) are automatically refreshed at the end 
  1292.  of the operation. If a problem is encountered during the process, a Copy/Move 
  1293.  Error dialog is popped up for user information and program direction. 
  1294.  
  1295.  Pausing or Aborting the Operation. While copying or moving files, the 
  1296.  operation may be paused if more than one file is selected. A common procedure 
  1297.  is described in Pausing and Aborting File Operations. 
  1298.  
  1299.  Simultaneous Operations 
  1300.  
  1301.  If one window is in use for an operation (for instance, a long copy job), the 
  1302.  other window may be used in a normal manner for other operations. An exception 
  1303.  is that the mouse cannot be used to select a target path on a drive not in use 
  1304.  in either file window. Use the directory tree select buttons at the bottom of 
  1305.  the Directory Window to select either currently logged drive. If the target 
  1306.  drive is not one of the currently logged drives, the desired full target path 
  1307.  may be inserted manually with the keyboard in the target path entry field as 
  1308.  noted above. 
  1309.  
  1310.  
  1311. ΓòÉΓòÉΓòÉ 5.2.1. File Copy/Move Errors ΓòÉΓòÉΓòÉ
  1312.  
  1313. Errors During Copy or Move Operations 
  1314.  
  1315. A Copy or Move error will cause the following dialog to be displayed: 
  1316.  
  1317. The dialog is system modal which means it preempts all mouse and keyboard 
  1318. inputs. There are five pushbuttons which you use to direct how to recover from 
  1319. the error. They are: 
  1320.  
  1321.  This option is available only if Confirm Copy Overwrite is checked in the 
  1322. Settings Notebook, Page 2_1 (Options Tab). If the error was because the file 
  1323. existed in the target directory, pushing O/W All (Overwrite All) will cause the 
  1324. program to not only overwrite the file shown but all other cases of duplicate 
  1325. file names in the target directory. 
  1326.  
  1327.  This option is available only if Confirm Copy Overwrite is checked in the 
  1328. Settings Notebook, Page 2_1 (Options Tab). If the error was because the file 
  1329. existed in the target directory, pushing OverWrite will cause the program to 
  1330. overwrite only the file shown. 
  1331.  
  1332.  Pushing Skip will cause the program to skip copying the file shown. 
  1333.  
  1334.  Pushing Cancel will terminate the copy operation. 
  1335.  
  1336.  Displays this help panel. 
  1337.  
  1338.  
  1339. ΓòÉΓòÉΓòÉ 5.3. Deleting Files ΓòÉΓòÉΓòÉ
  1340.  
  1341. Deleting Files 
  1342.  
  1343. Files may be deleted with or without the intervening File Delete dialog. This 
  1344. dialog is intended to serve as a confirmation that the user wants to delete the 
  1345. selected files and gives the user the opportunity to back out of the operation. 
  1346. The Confirm File Delete option in the Settings Notebook turns this confirmation 
  1347. on or off. 
  1348.  
  1349. The recommended method to initiate file deletions is to select Delete from the 
  1350. file window menu (RMB click in window). The menu gives the user a visual 
  1351. reminder as to whether the File Delete dialog will be used by indicating 
  1352. Delete.... Otherwise, the Delete menu option is line bordered and selecting 
  1353. delete in this case immediately deletes the selected files.  Using the window 
  1354. popup menu also insures that the user is well aware of which file window is 
  1355. active and for which the delete command applies. 
  1356.  
  1357. Alternatively, the delete operation may be initiated by selection from the 
  1358. action bar pulldown menu, the Button Bar Delete pushbutton or pressing Ctrl+Del 
  1359. from the keyboard. 
  1360.  
  1361. The File Delete dialog appears overlaying a portion of the Data Panel.  The 
  1362. dialog contains two data fields: 
  1363.  
  1364.       Γûá The upper field contains the full file path and file name of the first 
  1365.       file in the selected list. 
  1366.  
  1367.       Γûá The middle field summarizes the additional files included in the delete 
  1368.       operation. 
  1369.  
  1370.  A check box for control of the type of file delete (recoverable or not 
  1371.  recoverable) is provided. If the box is checked, the file(s) are permanently 
  1372.  deleted. Otherwise, they are deleted to the delete directory if the 
  1373.  environment variable SET DELDIR is present in the config.sys file. 
  1374.  
  1375.  A visual warning that all selected files will be deleted is also presented in 
  1376.  the dialog. 
  1377.  
  1378.  The dialog is moveable and may be resized in length to enhance viewing long 
  1379.  paths and filenames. 
  1380.  
  1381.  When the operation dialog is present, the source File Window is locked from 
  1382.  further normal user input until the selected operation is complete or 
  1383.  cancelled.  However, you can modify the selected file list by holding down the 
  1384.  Ctrl key and using the LMB to deselect files from the list or select other 
  1385.  files to be added to the list. This is a common feature of the Copy, Move, 
  1386.  Delete, Zip and Unzip dialogs. 
  1387.  
  1388.   Pressing the Delete pushbutton in the dialog will initiate the delete 
  1389.  operation. The deleted files are removed from the window as they are deleted 
  1390.  and the window is refreshed at the end of the operation automatically. If a 
  1391.  problem is encountered during the process, a Delete Error dialog is popped up 
  1392.  for user information and direction. 
  1393.  
  1394.  Aborting the Operation 
  1395.  
  1396.   If more than one file is selected for the operation, a green pushbutton, 
  1397.  labeled Press/Esc to Pause, will replace the Data Summary window at the bottom 
  1398.  of the file window once the operation starts.  Clicking this pushbutton with 
  1399.  the mouse, or pressing Esc on the keyboard, will pause the operation.  The 
  1400.  user then has the option to Abort or Continue using a split version of the 
  1401.  same pushbutton. Because most operations are very fast, there is hardly time 
  1402.  to pause operations involving only a few files. 
  1403.  
  1404.  
  1405. ΓòÉΓòÉΓòÉ 5.3.1. File Deletion Errors ΓòÉΓòÉΓòÉ
  1406.  
  1407. Errors During Delete Operations 
  1408.  
  1409. A Delete error will cause the following dialog to be displayed: 
  1410.  
  1411. The dialog is system modal which means it preempts all mouse and keyboard 
  1412. inputs. 
  1413.  
  1414. There are five pushbuttons which you use to direct how to recover from the 
  1415. error. They are: 
  1416.  
  1417.  If the error is because the file has the ReadOnly attribute set, pushing Del 
  1418. R/O will delete the file if it's not a shared file. 
  1419.  
  1420.  Pushing Skip will cause the program to skip deleting the file shown. The 
  1421. Delete operation is resumed with the next file. 
  1422.  
  1423.  Pushing Cancel will terminate the Delete operation. 
  1424.  
  1425.  Displays this help panel. 
  1426.  
  1427.  
  1428. ΓòÉΓòÉΓòÉ 5.4. Zip and Unzip Files ΓòÉΓòÉΓòÉ
  1429.  
  1430. Zip and Unzip File Operations 
  1431.  
  1432. The common procedure for using the dialogs to zip and unzip files is as 
  1433. follows: 
  1434.  
  1435.    1. Select file(s) - Select one or more files from a file window for the 
  1436.       operation. For an unzip operation, the file extension(s) must be .ZIP. 
  1437.  
  1438.    2. Select operation - Use popup or action menus, or accelerator keys. 
  1439.  
  1440.    3. Select target path - If drive is already selected in one of the file 
  1441.       windows, click in that file window.  Otherwise, read the desired drive 
  1442.       into the opposite file window. Click on desired directory in the 
  1443.       directory tree. 
  1444.  
  1445.    4. Initiate operation. - Press action pushbutton in dialog window. 
  1446.  
  1447.  The selected operation dialog appears overlaying a portion of the Data Panel. 
  1448.  The dialog is moveable and may be resized in length to enhance viewing long 
  1449.  paths and filenames. The dialog contains four data fields. 
  1450.  
  1451.       Γûá The first field contains the full file path and file name of the first 
  1452.       selected file. 
  1453.  
  1454.       Γûá The second field summarizes the additional files included in the 
  1455.       operation. 
  1456.  
  1457.       Γûá The third field, labeled To, contains the target path for the zip or 
  1458.       unzip operation. It is initialized to the path of the other file window. 
  1459.       This target path may be changed by mouse, keyboard or manual input. For 
  1460.       zip operations, a "noname00" filename is added to the target path. The 
  1461.       filename may be edited as desired. Error checking is performed on edited 
  1462.       paths and filenames to ensure that they conform to the drive type (FAT or 
  1463.       HPFS) requirements. 
  1464.  
  1465.       Γûá The fourth field shows the zip or unzip switches to be used for the 
  1466.       operation (defaulted to the options set in the Settings notebook).  It 
  1467.       also contains an Options pushbutton which, when pressed, will popup the 
  1468.       switch options dialog appropriate for the operation.  Alternatively, the 
  1469.       user may manually edit the switch field. 
  1470.  
  1471.  When the operation dialog appears, the source File Window is locked from 
  1472.  further normal user input until the selected operation is complete or 
  1473.  cancelled.  However, you can modify the selected file list by holding down the 
  1474.  Ctrl key and using the LMB to deselect files from the list or select other 
  1475.  files to be added to the list. This is a common feature of the Copy, Move, 
  1476.  Delete, Zip and Unzip dialogs. 
  1477.  
  1478.  The initialized target directory for zip operations is the path of the 
  1479.  opposite file window. The initialized target directory for unzip operations is 
  1480.  the current directory where the zip file(s) is/are located. 
  1481.  
  1482.  Setting the Target Path by Point and Click 
  1483.  
  1484.  The objective of the following cases is to get the directory tree of the 
  1485.  target drive in the directory window. When the correct tree is displayed, 
  1486.  single click on the desired target directory. The To field in the dialog 
  1487.  updates to the selected directory.  The directory tree will not accept double 
  1488.  clicks if it's associated file window is locked. 
  1489.  
  1490.  Target Drive in Use in Opposite Window. 
  1491.  
  1492.  If the target directory is on the drive in the opposite window, click in the 
  1493.  opposite window (or use the directory tree select buttons at the bottom of the 
  1494.  Directory Window) to change the active file window and directory tree to the 
  1495.  opposite window. 
  1496.  
  1497.  Target Drive in Neither Window. 
  1498.  
  1499.  Activate the opposite window (if not in use) and change to the desired drive. 
  1500.  
  1501.  If the target directory is on another drive and both windows are in use, the 
  1502.  full target path must be typed into the target path window. Error checking is 
  1503.  performed on edited paths and filenames to ensure that they conform to the 
  1504.  drive type (FAT or HPFS) requirements. 
  1505.  
  1506.  Initiating the Operation 
  1507.  
  1508.  When the desired path is displayed in the target field, click on the operation 
  1509.  pushbutton (Zip or Unzip) to start the operation. The selection emphasis is 
  1510.  removed from the files as they are sent to the executable programs, ZIP.EXE 
  1511.  and UNZIP.EXE. The window(s) are automatically refreshed at the end of the 
  1512.  operation as appropriate. 
  1513.  
  1514.  A foreground OS/2 window will pop up running ZIP.EXE or UNZIP.EXE.  The user 
  1515.  interacts with these windows if required to consent to certain actions.  The 
  1516.  foreground window will close automatically when the operation is finished. 
  1517.  
  1518.  Aborting the Operation 
  1519.  
  1520.  If more than one file is selected for the operation, a green pushbutton, 
  1521.  labeled Press/Esc to Pause, will replace the Data Summary window at the bottom 
  1522.  of the file window once the operation starts. Clicking this pushbutton with 
  1523.  the mouse, or pressing Esc  on the keyboard, will pause the operation.  The 
  1524.  user then has the option to Abort or Continue using a split version of the 
  1525.  same pushbutton. Because most operations are very fast, there is hardly time 
  1526.  to pause operations involving only a few files.  Once the foreground OS/2 
  1527.  window running the ZIP or UNZIP executable appears, the operation on the 
  1528.  current file cannot be aborted from FileStar. The foreground window executing 
  1529.  ZIP or UNZIP may be aborted with a Ctrl+C from the keyboard. 
  1530.  
  1531.  
  1532. ΓòÉΓòÉΓòÉ 5.4.1. Setting Zip Switches ΓòÉΓòÉΓòÉ
  1533.  
  1534. The Zip Options This dialog is used to set the zip options. The string is 
  1535. updated as you change options. Those options that are mutually exclusive are 
  1536. handled within the program. 
  1537.  
  1538. The degree of compression is increased with higher compression levels. A 
  1539. compression level of zero results in no compression. The compression speed is 
  1540. slower with higher compression levels. 
  1541.  
  1542. Do not double click with the LMB on these options. The Options string may not 
  1543. be the same as the checked options in this case. 
  1544.  
  1545.  
  1546. ΓòÉΓòÉΓòÉ 5.4.2. Setting Unzip Switches ΓòÉΓòÉΓòÉ
  1547.  
  1548. The Unzip Options This dialog is used to set the unzip options. Check each 
  1549. option that you want to include in the default option string. The string is 
  1550. updated as you change options. Those options that are mutually exclusive are 
  1551. handled within the program. 
  1552.  
  1553. Do not double click with the LMB on these options. The Options string may not 
  1554. be the same as the checked options in this case. 
  1555.  
  1556.  
  1557. ΓòÉΓòÉΓòÉ 5.5. Viewing Zip File Contents ΓòÉΓòÉΓòÉ
  1558.  
  1559. The ZipData Window 
  1560.  
  1561. The ZipData Window is used to view and manipulate the files of a ZIP archive 
  1562. file. The archive file may be selected and read into the window with a LMB 
  1563. double click, the menus or the Alt+V key combination. 
  1564.  
  1565. The window is sizeable and moveable. Size and position data are saved on 
  1566. closing the window. It has most of the window characteristics of the file 
  1567. windows, including popup function and options menus with the same hot zones for 
  1568. activation. It inherits the file window background color and detail view titles 
  1569. configuration. Only the text and detail views are available. The files may be 
  1570. sorted by the same options except the date sort is not available. 
  1571.  
  1572. The program must have access to Info-ZIP's UNZIP.EXE to read the file into the 
  1573. window and access to ZIP.EXE to perform some of the window functions. The path 
  1574. to these files must exist in the External Programs Zip entry field, Page 3_1, 
  1575. Settings Notebook. The program automatically fills this field if the files are 
  1576. found in the environment path. 
  1577.  
  1578. If the temporary directory \WORKDIR does not exist as a subdirectory to the 
  1579. directory in which FILESTAR.EXE is installed, it is created along with the 
  1580. ZipData Window. While no harm is done if you later delete this directory, you 
  1581. just as well leave it alone so it does not have to be recreated. The program 
  1582. deletes all files and subdirectories in \WORKDIR either when the window is 
  1583. closed or the program is terminated. 
  1584.  
  1585. When viewing multiple files with the ZipData window, do not close it between 
  1586. files. When another ZIP file is selected, the window is emptied before reading 
  1587. the new file. You may also LMB double click on a zip file within the zip file 
  1588. in the window and that file will be read into the window. 
  1589.  
  1590. The image above does not show all the detail view fields. These are: 
  1591.  
  1592.       Γûá Filename - File name within the zip file. 
  1593.       Γûá Size - The normal, uncompressed file size in bytes. 
  1594.       Γûá Date - The last write file date. 
  1595.       Γûá Time - The last write file time. 
  1596.       Γûá Ratio - Percentage compression. 
  1597.       Γûá ArcSize - Compressed file size. 
  1598.       Γûá Method - Method of compression. 
  1599.  
  1600.  Window Functions 
  1601.  
  1602.  The window functions activated from either the window pushbuttons or popup 
  1603.  menu are: 
  1604.  
  1605.   - Pushing the WorkDir pushbutton dumps the entire zip file into the work 
  1606.  directory \WORKDIR. The ZipData Window is closed and the work directory is 
  1607.  read into the other file window, ready for you to use any file window 
  1608.  function. These files will be deleted either upon using the ZipData Window 
  1609.  again or at program termination, so treat them as temporary. There is an 
  1610.  exception; You may LMB double click an a zip file in the work directory, 
  1611.  display it in a ZipData Window and then dump this file into the work directory 
  1612.  without the previous files in the work directory being deleted. In other 
  1613.  words, the files in the work directory are not deleted if the zip file in the 
  1614.  window came from the work directory. 
  1615.  
  1616.   Launches the browse or image viewer program on the cursored file. A LMB 
  1617.  double click accomplishes the same thing. Views all file extensions supported 
  1618.  in a file window. 
  1619.  
  1620.   Initiates a dialog process to add files to the archive file in the window. 
  1621.  This pushbutton is labeled Create if the ZipData Window is launched without a 
  1622.  cursored zip file in the active file window. Pushing Create will start a 
  1623.  dialog process to create a zip file and add selected files to it. 
  1624.  
  1625.   Initiates a dialog process to extract selected files from the archive file in 
  1626.  the window to the directory of choice. 
  1627.  
  1628.   Starts the editor program on the cursored file. The file is extracted to the 
  1629.  work directory where it is edited. When the editor is closed the file is 
  1630.  re-zipped back into the archive file in the window. Edits ASCII and ICO, BMP 
  1631.  and PTR files. 
  1632.  
  1633.   Deletes the selected files in the ZipData Window from the archive file. 
  1634.  
  1635.   This is it. 
  1636.  .*************************************************************************\ 
  1637.  
  1638.  
  1639. ΓòÉΓòÉΓòÉ 5.6. Executing Files and the Command Line ΓòÉΓòÉΓòÉ
  1640.  
  1641. The Execute Dialog 
  1642.  
  1643. The Execute dialog is displayed when Exec is pushed on the Button Bar, Execute 
  1644. is selected from either the popup or pulldown menu for a file window or the key 
  1645. combination Alt+X is pushed. What is displayed in the dialog entry field is 
  1646. dependent on the file extension of the cursored file in the active file window. 
  1647. If it's an executable file, you get the cursored file preset in the Run entry 
  1648. field. If it's not, the entry field is blank and labeled Cmd. In either case, 
  1649. you may change the entry as needed to run a command or program. You may also 
  1650. select a different file from the file windows after the dialog is displayed. 
  1651. When the command is entered, simply press Go to execute the program or command. 
  1652.  
  1653. There are two check boxes in the dialog, Windowed and Auto Close, which allow 
  1654. the user the option to run the program or command either windowed or fullscreen 
  1655. (Windowed not checked)  and Auto Close enabled or not enabled. If Windowed is 
  1656. not checked, the program auto close option is disabled. For executable files, 
  1657. the type of program is automatically detected and shown in the title bar. Some 
  1658. program types will disable the windowed and auto close options as appropriate. 
  1659.  
  1660. The previous twenty entries are saved in a list that the user may drop down and 
  1661. select from. While the window has a minimum size, it may be resized to allow 
  1662. viewing more or all of the list and to lengthen the entry field. 
  1663.  
  1664.  
  1665. ΓòÉΓòÉΓòÉ 5.7. Setting File Filters ΓòÉΓòÉΓòÉ
  1666.  
  1667. File Filters 
  1668.  
  1669. This dialog is used to filter the files displayed in the File Windows. It is 
  1670. also used to select the type of file sorting saved at shutdown. 
  1671.  
  1672. The File Filter entry field is used to input a file filter mask. Standard use 
  1673. of "wildcards" are supported. The "*" means "all or all after", i.e.  *.txt 
  1674. would filter and display all the files with the file extension ".txt". Another 
  1675. example is os2*.ini would filter only those filenames starting with os2 and 
  1676. with the extension of ".ini". The "?"  is used to substitute "Any" for an 
  1677. individual character, i.e.  ??sh*.* would display only those files with 
  1678. filenames that have sh as the third and fourth characters. 
  1679.  
  1680. The last twenty (20) entries in the File Filter entry field are saved and 
  1681. displayed in the window below the entry field.  Selecting a filter from this 
  1682. list automatically inserts it into the entry field. 
  1683.  
  1684. The file filters are limited to 40 characters. 
  1685.  
  1686. The filter is not applied to the file windows until the user presses the Set 
  1687. pushbutton. The *.* pushbutton is the easy way to restore the "all" files 
  1688. filter. 
  1689.  
  1690. Checking the System and Hidden check boxes will include files with those 
  1691. attributes in the displayed file list.  If unchecked, files with that attribute 
  1692. are not displayed. 
  1693.  
  1694. File Sort 
  1695.  
  1696. While the sort parameter may be individually changed for each file window at 
  1697. any time in a session, those settings are NOT saved from session to session. 
  1698. The setting in the File Filter and Sort Options dialog is used for saving the 
  1699. type of sorting used in the file windows.  It is applied to both file windows. 
  1700.  
  1701. Using the Keyboard 
  1702.  
  1703. Use the Tab key to step from the File Filter entry field, to the pushbuttons, 
  1704. then to the Include and Sort options. When tabbed to the entry field, Include 
  1705. or Sort options, use the keyboard Up/Dn arrows to further select items from 
  1706. those options. To check or uncheck the check boxes in the Include option, use 
  1707. the keyboard spacebar. 
  1708.  
  1709.  
  1710. ΓòÉΓòÉΓòÉ 5.8. Changing File Attributes ΓòÉΓòÉΓòÉ
  1711.  
  1712. File Attributes 
  1713.  
  1714. The attributes of all selected files are changed in one operation by presetting 
  1715. the desired attributes and then pushing Set.  The four modifiable attributes 
  1716. are: 
  1717.  
  1718.       Read Only - File cannot be modified (written to) by the user. 
  1719.  
  1720.       Hidden - File is not displayed by most programs and the dir command. 
  1721.  
  1722.       System - File is for use by the operating system. 
  1723.  
  1724.       Archived - File is marked when changed. 
  1725.  
  1726.  For each attribute, select No Change, Set or Clear.  Pressing Set causes the 
  1727.  selected attributes to be set for each selected file in the active file 
  1728.  window. 
  1729.  
  1730.  To set attributes from the keyboard, use the Tab key to select the attribute 
  1731.  to change, then use the Up/Dn arrow keys to select the setting.  The Tab key 
  1732.  cycles through the attributes and pushbuttons. 
  1733.  
  1734.  The attributes of the cursored file is displayed in the Attributes window in 
  1735.  the Data Panel and indicated by "r", "h", "s" and "a".  The attributes of each 
  1736.  displayed file may be viewed in the Attributes column of the Details View. 
  1737.  
  1738.  
  1739. ΓòÉΓòÉΓòÉ 5.9. Changing File Date and Time ΓòÉΓòÉΓòÉ
  1740.  
  1741. File Date/Time 
  1742.  
  1743. The file date and time of all selected files in the active File Window is 
  1744. changed in one operation by presetting the desired date and time and then 
  1745. pushing Set.  Use the dialog up/dn scroll buttons to "spin" the desired 
  1746. parameter into the applicable window.  Although the Sec.  control sets to the 
  1747. nearest second, the actual set time is set to the nearest two seconds. 
  1748.  
  1749. To set file date and time from the keyboard, use the Tab key to select the 
  1750. window to modify (Mo., Day, Year etc.), then use the Up/Dn arrow keys to modify 
  1751. the parameter.  The Tab key cycles through the windows and pushbuttons. 
  1752.  
  1753. The file date and time are displayed in the file Date and Time window in the 
  1754. Data Panel.  The displayed values are the "last write date and time". 
  1755.  
  1756. Most users have no need to modify the file date and time.  In most cases it is 
  1757. desirable to leave the file date and time as set by the system. 
  1758.  
  1759. The changing of date and time of directory entries is not currently supported. 
  1760. The last write date and time for directories (equates to create date and time) 
  1761. can be viewed by selecting Query for the selected directory from the popup or 
  1762. action bar menus. 
  1763.  
  1764.  
  1765. ΓòÉΓòÉΓòÉ 5.10. Pause and Abort File Operations ΓòÉΓòÉΓòÉ
  1766.  
  1767. Aborting a File Operation 
  1768.  
  1769. The pushbutton  will replace the Data Summary window at the bottom of the file 
  1770. window once the operation starts if more than one file is selected. Clicking 
  1771. this pushbutton with the mouse, or pressing Esc on the keyboard, will pause the 
  1772. operation. The user then has the option to Abort or Continue  using a split 
  1773. version of the same pushbutton. Because most operations are very fast, there is 
  1774. hardly time to pause operations involving only a few files. 
  1775.  
  1776.  
  1777. ΓòÉΓòÉΓòÉ 5.11. Renaming a File ΓòÉΓòÉΓòÉ
  1778.  
  1779. Renaming a File 
  1780.  
  1781. The file to be renamed must be both cursored and selected (highlighted) in the 
  1782. active file window. Selecting Rename from the window menu (or pushing the key 
  1783. combination Alt+N) will present a long file name entry field in the Data Panel 
  1784. with the cursored file name ready for editing. 
  1785.  
  1786. If changes are made in the file name, the Name pushbutton label changes to 
  1787. Rename which is then pushed to rename the file. If no changes are made to the 
  1788. filename, pushing the Name pushbutton or Esc cancels the operation. 
  1789.  
  1790.  
  1791. ΓòÉΓòÉΓòÉ 5.12. Printing a File ΓòÉΓòÉΓòÉ
  1792.  
  1793. Printing a File 
  1794.  
  1795. When Print is selected from a file window menu (or the key combination Alt+P is 
  1796. pushed), the cursored file is sent to the printer. There currently is no print 
  1797. formatting capability. 
  1798.  
  1799. A more sophisticated print capability is in development. 
  1800.  
  1801.  
  1802. ΓòÉΓòÉΓòÉ 5.13. Editing Files ΓòÉΓòÉΓòÉ
  1803.  
  1804. Editing Files 
  1805.  
  1806. An editing operation must be initiated from one of the menus, the Button Bar 
  1807. Edit pushbutton or Alt+E combination keys. The cursored file is the object 
  1808. edited. It must be an ASCII text file or an error is returned. The program 
  1809. tests for a valid ASCII text file. The file will be edited using the editor 
  1810. entered as the external program editor in the Settings Notebook (defaults to 
  1811. E.EXE). Any DOS or OS/2 editor should work. 
  1812.  
  1813. If the cursored file has an extension of .BMP, .PTR or .ICO, the OS/2 utility 
  1814. ICONEDIT.EXE is started to edit or view the file. These files (E.EXE and 
  1815. ICONEDIT.EXE) must be located in the environment path. 
  1816.  
  1817.  
  1818. ΓòÉΓòÉΓòÉ 5.14. Browsing Files ΓòÉΓòÉΓòÉ
  1819.  
  1820. Browsing Files 
  1821.  
  1822. ASCII Text Files.  A LMB double click (or keyboard Enter) on an ASCII text file 
  1823. will launch the browse program entered on the External Programs page in the 
  1824. Settings Notebook (defaulted to E.EXE editor) with the selected file as the 
  1825. program argument. The program tests for a valid ASCII text file. 
  1826.  
  1827. Archived Files with .ZIP Extension.  Double clicking with the LMB (or keyboard 
  1828. Enter) on a .ZIP file causes the contents of the archived file to be listed in 
  1829. a ZipData Window (support is limited to those files that are compatible with 
  1830. InfoZip's UNZIP.EXE and ZIP.EXE). 
  1831.  
  1832. Image Files.  A LMB double click (or keyboard Enter) with a selected file 
  1833. extension of .BMP, .GIF, .TIF, .TGA, .JPG , .EPS, .PIC, .PCD, .SHW or .PCX will 
  1834. result in the launch of the imaging program entered for external program 
  1835. support in the Settings Notebook. 
  1836.  
  1837. Other Files.  A LMB double click (or keyboard Enter) on a file with an 
  1838. extension of .INF results in launching the OS/2 VIEW.EXE utility to view the 
  1839. selected file. 
  1840.  
  1841. A LMB double click (or keyboard Enter) on a file with an extension of .MET 
  1842. results in launching the OS/2 PICVIEW.EXE utility to view the selected file. 
  1843.  
  1844. The VIEW.EXE and PICVIEW.EXE files must be in a directory included in the 
  1845. environment path (they typically are). 
  1846.  
  1847.  
  1848. ΓòÉΓòÉΓòÉ 5.15. Saving File List ΓòÉΓòÉΓòÉ
  1849.  
  1850. Saving the File List 
  1851.  
  1852. The list of selected files may be saved to a ASCII disk file in the current 
  1853. directory, automatically named FILELIST.TXT, by selecting Save File List from a 
  1854. menu or pressing the key combination Alt+Y.  If you need to preserve this file, 
  1855. you must rename it. Each time the list is saved, the file FILELIST.TXT is 
  1856. overwritten. 
  1857.  
  1858. A complete list of all files in any directory may be saved by selecting all 
  1859. files, then saving the list. 
  1860.  
  1861.  
  1862. ΓòÉΓòÉΓòÉ 5.16. Printing File List ΓòÉΓòÉΓòÉ
  1863.  
  1864. Printing File List 
  1865.  
  1866. The list of selected files may be sent to the printer by selecting Print File 
  1867. List from a menu.  The list is saved to a file named FILELIST.TXT in the 
  1868. current directory, then sent to the printer. 
  1869.  
  1870. A complete list of all files in any directory may be printed by selecting all 
  1871. files, then printing the list. 
  1872.  
  1873.  
  1874. ΓòÉΓòÉΓòÉ 6. Data Panel ΓòÉΓòÉΓòÉ
  1875.  
  1876. The Data Panel 
  1877.  
  1878. The Data Panel consists of eight pushbuttons that also serve as the label for 
  1879. eight data windows for drive and file data, the Message Window and today's date 
  1880. and time of day windows. The functions of the eight pushbuttons are as follows: 
  1881.  
  1882.  Label for drive used window immediately below. The windowed data are the 
  1883. allocated bytes used on the drive of the active file window. When pushed, the 
  1884. data window will show the allocated bytes used for all hard drives on the 
  1885. system. 
  1886.  
  1887.  Label for drive free window immediately below. The windowed data are bytes 
  1888. free on the drive of the active file window. When pushed, the data window will 
  1889. show the bytes free for all hard drives on the system. 
  1890.  
  1891.  Label for the Selected Window immediately below. The window shows the 
  1892. allocated file size for all selected files in the active file window. When 
  1893. pushed, all files in the file window are selected or deselected, depending on 
  1894. the all-selected state. 
  1895.  
  1896.  Label for the file Name Window immediately below. The file name shown is the 
  1897. name of the cursored file. When pushed, a file rename mode is entered with a 
  1898. long file name entry field presented. The label changes to Rename if the field 
  1899. is edited. Pushing Rename renames the cursored file. 
  1900.  
  1901.  Label for the file Size Window immediately below. The file size shown in the 
  1902. window is the actual file size on disk. When pushed, the Drive, Directory and 
  1903. File Windows are reset to their default size and position. 
  1904.  
  1905.  Label for the file Date Window immediately below. The window shows the last 
  1906. write date for the cursored file. When pushed, the Change Date/Time dialog is 
  1907. activated which allows the user to change the file date and time of all 
  1908. selected files. 
  1909.  
  1910.  Label for the file Time Window immediately below. The window shows the last 
  1911. write time for the cursored file. When pushed, the Change Date/Time dialog is 
  1912. activated which allows the user to change the file date and time of all 
  1913. selected files. 
  1914.  
  1915.  Label for the file Attributes Window immediately below. The window shows the 
  1916. current file attributes for the cursored file. When pushed, the Change File 
  1917. Attributes dialog is activated which allows the user to change the attributes 
  1918. of all selected files. 
  1919.  
  1920.  
  1921. ΓòÉΓòÉΓòÉ 7. Button Bar ΓòÉΓòÉΓòÉ
  1922.  
  1923. The Button Bars 
  1924.  
  1925. The Button Bar consists of thirteen pushbuttons labelled in text. The 
  1926. pushbuttons provide rapid selection of the most frequently used functions. 
  1927.  
  1928.  Opens an OS/2 window with the path of the active file window. 
  1929.  
  1930.  Opens a DOS window with the path of the active file window. 
  1931.  
  1932.  Activates the Modify Directory Structure dialog. Move, rename, delete and 
  1933. create directories. 
  1934.  
  1935.  Activates the Executable File or Command line dialog. Use to run programs. 
  1936.  
  1937.  Launches an external editor with the cursored file as the argument. 
  1938.  
  1939.  Initiates a file copy operation using the Copy dialog. 
  1940.  
  1941.  Initiates a file move operation  using the Move dialog. 
  1942.  
  1943.  If enabled, activates File Delete dialog to confirm file deletion. If not 
  1944. enabled, deletes the selected files without confirmation. 
  1945.  
  1946.  Sends the cursored file to the printer. 
  1947.  
  1948.  Activates the File Filter and Sort Option dialog. Used to filter the displayed 
  1949. files. 
  1950.  
  1951.  Activates the File Find dialog. Used to search selected drives for files 
  1952. matching wildcard. 
  1953.  
  1954.  Opens the Settings Notebook. 
  1955.  
  1956.  Replaces the Button Bar with the Help Button Bar. 
  1957.  
  1958. When the Help Button Bar is displayed, the following functions are available: 
  1959.  
  1960.  Opens the FileStar Help Index window. 
  1961.  
  1962.  Displays the FileStar General Help window. 
  1963.  
  1964.  Opens a help window that describes the FileStar keyboard interface. 
  1965.  
  1966.  A short description of the help system. 
  1967.  
  1968.  Opens dialogs to input registration data. 
  1969.  
  1970.  A marketing description of FileStar. 
  1971.  
  1972.  Replaces the Help Button Bar with the normal Button Bar. 
  1973.  
  1974.  
  1975. ΓòÉΓòÉΓòÉ 8. Settings Notebook ΓòÉΓòÉΓòÉ
  1976.  
  1977. Using the Notebook 
  1978.  
  1979. Input focus must be in a page for F1 to select help for that page. 
  1980.  
  1981. Selecting pages with the mouse is the easiest way to flip pages.  Simply click 
  1982. on the tabs or the arrow buttons. 
  1983.  
  1984. Selecting pages using the keyboard can be a little confusing at times.  To flip 
  1985. pages, use Alt+PgUp/PgDn.  This won't work if the focus is on the main notebook 
  1986. window.  To switch focus onto the notebook, use Alt+Up/Dn arrow keys. These 
  1987. keys also move the focus to and from the page and the tab. 
  1988.  
  1989. The notebook is closed by selecting "Close" on the System Menu (click on the 
  1990. Title Bar icon) or double clicking on the Title Bar icon. Optionally, the 
  1991. notebook may be closed by clicking on the SHS icon. From the keyboard, use 
  1992. Alt+F4. 
  1993.  
  1994. All notebook options are saved to the FILESTAR.INI file (in the same directory 
  1995. as the FILESTAR.EXE file) when the notebook is closed. 
  1996.  
  1997.  
  1998. ΓòÉΓòÉΓòÉ 8.1. Configuration Options ΓòÉΓòÉΓòÉ
  1999.  
  2000. Setting the Configuration Options 
  2001.  
  2002. All options are saved when the notebook is closed (Alt-F4). 
  2003.  
  2004. Button Function Bar - The Button Function Bar and its sibling window, the 
  2005. Button Help Bar, are toggled ON and OFF with this option.  The Button Function 
  2006. Bar provides one click access to the most frequently used items and features. 
  2007. Users may prefer to operate FileStar/2 without the Button Function Bar or 
  2008. standard PM menu once familiar with the program and the popup menus. 
  2009.  
  2010. Standard Menu - The standard menu for PM windows may be toggled ON and OFF to 
  2011. provide more area for other windows.  This option is for users that prefer to 
  2012. use other features like the popup menus or the Button Function Bar. 
  2013.  
  2014. Details View Titles - If checked, the Details View is configured with column 
  2015. titles. Without column titles, the number of files displayed in the window 
  2016. field of view is increased. 
  2017.  
  2018. Mixed Case  - This option sets the case used for text in the directory and file 
  2019. windows. Mixed case is the case that was used to store the file name/directory 
  2020. when it was created.  Lower case is selected with Mixed Case unchecked. A drive 
  2021. rescan must be performed to change the case of the directory tree following a 
  2022. change of this option. 
  2023.  
  2024. Always Expand Tree - When selected, this option causes the directory tree to 
  2025. always expand all branches.  Otherwise only the used branches are expanded. 
  2026.  
  2027. Default is Forced File Delete - If checked, the Files Not Recoverable checkbox 
  2028. in the Delete dialog will initially be checked. If the user does not change the 
  2029. Files Not Recoverable option, files will be permanently deleted. 
  2030.  
  2031. Confirm File Delete - If checked, a File Delete dialog is always used to 
  2032. confirm file deletion. If unchecked, files are deleted without confirmation. 
  2033.  
  2034. Confirm Directory Delete - If checked, the Modify Directory dialog is always 
  2035. used to initiate deletion of directories. If unchecked, empty directories are 
  2036. deleted without confirmation. Directories with files and/or subdirectories are 
  2037. deleted only after confirmation by an interactive message. 
  2038.  
  2039. Confirm Copy Overwrite - If checked, files will not be overwritten during a 
  2040. copy operation without user confirmation. If unchecked, files of the same name 
  2041. in the target directory are overwritten without confirmation. 
  2042.  
  2043. Default Drag is Move - If checked, the default drag (no other keys pressed) 
  2044. within FileStar is a move operation, same as the WPS. If unchecked, the default 
  2045. drag is a copy operation. In either case the operation may be changed with the 
  2046. Ctrl and Shift keys. If the default drag is a Copy operation and the drag is to 
  2047. an object outside FileStar, the drag operation reverts to a move operation. 
  2048.  
  2049. Execute DOS Full Screen - If checked, DOS applications are started full screen. 
  2050. This option only applies to starting DOS applications with a LMB double click 
  2051. or keyboard Enter. It has no effect on starting applications with the Execute 
  2052. dialog. 
  2053.  
  2054. Save on Shutdown  - FileStar/2 saves all notebook settings to a FILESTAR.INI 
  2055. file, independent of this option.  When checked, this option results in 
  2056. FileStar/2 saving additional items to the OS2.INI file.  Included in these 
  2057. additional items are the color and font changes that the user has made with the 
  2058. OS/2 Color and Fonts Palettes and FileStar window positions at shutdown.  If 
  2059. changes have been made and previously saved on a prior shutdown, those changes 
  2060. are not destroyed but simply not used on the next startup.  Reselection of this 
  2061. option will restore previously made and saved changes. 
  2062.  
  2063. Delete From OS2.INI - Checking this option will delete the FileStar entries 
  2064. from the OS2.INI file. It also unchecks the Save On Shutdown option. Use this 
  2065. option when removing FileStar from your hard disk or to reset color and font 
  2066. customization to default values. 
  2067.  
  2068. Message Persistence  - Most of the FileStar messages are displayed in the 
  2069. Message window of the Data Panel. Messages are erased automatically after the 
  2070. persistence time selected with this control for information messages. Warning 
  2071. and error messages persist for two or three times the persistence value. 
  2072.  
  2073.  
  2074. ΓòÉΓòÉΓòÉ 8.2. External Program Files ΓòÉΓòÉΓòÉ
  2075.  
  2076. Defining External Program File Support 
  2077.  
  2078. FileStar does not currently support the WPS file associations. Instead, double 
  2079. clicking or "Executing" a file in one of the file windows launches or runs a 
  2080. pre-defined program associated with the file extension. For instance, double 
  2081. clicking on an *.INF file will cause the file to be run with VIEW.EXE. Since 
  2082. there are various options available for ASCII editors, browsers and printer 
  2083. support, the user may indicate in the fields of the File Support dialog the 
  2084. file(s) that are desired for the operations indicated. 
  2085.  
  2086. Edit - Enter the path and name of the editor that you want to use for editing 
  2087. ASCII text files in the "Edit" field of the Settings Notebook, page 3_1. 
  2088. Default is the OS/2 Enhanced Editor, EPM.EXE. 
  2089.  
  2090. Browse - Enter the path and name of the browser that you want to use for 
  2091. listing ASCII text files in the "Browse" field of the Settings Notebook, page 
  2092. 3_1. Default is the OS/2 Editor, E.EXE. 
  2093.  
  2094. Print - Enter the name of the print interface file that you want to use in the 
  2095. "Print" field of the Settings Notebook, page 3_1.  Default is the OS/2 print 
  2096. file, PRINT.COM. 
  2097.  
  2098. Zip * - FileStar currently supports archiving files only with Info-Zip's 
  2099. ZIP.EXE (v2.0.1) and extracting archived files with Info-Zip's UNZIP.EXE 
  2100. (v5.1). These files were included in the distributed FILESTAR.ZIP file. They 
  2101. must be located in the same directory and the path to these files must either 
  2102. be entered in the config.sys path or in the "Zip *" field of the Settings 
  2103. Notebook, page 3_1. 
  2104.  
  2105. Image - Enter the path and file name of the image viewer program that you want 
  2106. to use to view graphic files. File names with extensions of .BMP, .GIF, .TIF, 
  2107. .TGA, .JPG , .EPS, .PIC, .PCD, .SHW and .PCX are supported and passed to the 
  2108. viewer program. 
  2109.  
  2110.  
  2111. ΓòÉΓòÉΓòÉ 8.3. Changing Window Colors ΓòÉΓòÉΓòÉ
  2112.  
  2113. Coloring the FileStar Windows 
  2114.  
  2115. The OS/2 color palette will NOT change the window background and the selected 
  2116. file hilite background and foreground colors of the directory and file windows. 
  2117. You may change the window background colors using the controls presented. 
  2118. Select either File Window #1 or #2. The color control scroll bars will change 
  2119. to the Red, Green and Blue setting of that window.  Use the mouse or keyboard 
  2120. to change these settings, The window will update in the background when the 
  2121. scrolling terminates.  The small sample windows reflect the colors during 
  2122. scroll.  The notebook may be moved to view the changes in FileStar's windows. 
  2123.  
  2124. Currently, only the window background color may be changed. A future version 
  2125. will permit changing the foreground color and the highlight colors as well. 
  2126.  
  2127. The user is encouraged to use the OS/2 color palette to colorize FileStar. 
  2128. Almost all pushbutton, controls and windows may be colored with the palette. 
  2129. However, to save all custom colorization you must check the "Save on Shutdown" 
  2130. checkbox on page 2_1 of the Settings Notebook. 
  2131.  
  2132.  
  2133. ΓòÉΓòÉΓòÉ 8.4. Setting Default Zip Switch Options ΓòÉΓòÉΓòÉ
  2134.  
  2135. The Zip Switch Options This dialog is used to set the default zip options. 
  2136. Check each option that you want to include in the default option string. The 
  2137. string is updated as you change options. Those options that are mutually 
  2138. exclusive are handled within the program. 
  2139.  
  2140. The degree of compression is increased with higher compression levels. A 
  2141. compression level of zero results in no compression. The compression speed is 
  2142. slower with higher compression levels. 
  2143.  
  2144. Do not double click with the LMB on these options. The Options string may not 
  2145. be the same as the checked options in this case. 
  2146.  
  2147.  
  2148. ΓòÉΓòÉΓòÉ 8.5. Setting Default Unzip Switch Options ΓòÉΓòÉΓòÉ
  2149.  
  2150. The Unzip Switch Options This dialog is used to set the default unzip options. 
  2151. Check each option that you want to include in the default option string. The 
  2152. string is updated as you change options. Those options that are mutually 
  2153. exclusive are handled within the program. 
  2154.  
  2155. Do not double click with the LMB on these options. The Options string may not 
  2156. be the same as the checked options in this case. 
  2157.  
  2158.  
  2159. ΓòÉΓòÉΓòÉ 9. Product Information ΓòÉΓòÉΓòÉ
  2160.  
  2161. About FileStar 
  2162.  
  2163. FileStar is a simple, fast, intuitive and powerful OS/2 file management utility 
  2164. that all levels of users should keep handy on the WPS Desktop. It is intended 
  2165. to be an easy transition tool for those DOS and Windows users migrating to the 
  2166. OS/2 environment. It is not intended to be a replacement for the WPS Drives 
  2167. object. It provides users with those file management functions that the 
  2168. majority of users use most frequently. 
  2169.  
  2170. FileStar has a simple, and in some cases unique, interface to the files on your 
  2171. disk drives. It combines familiar interface concepts with the controls 
  2172. available in the PM environment. It uses a two-window approach to viewing 
  2173. directory contents and drag and drop for moving and copying files between these 
  2174. windows and other WPS objects that accept files.  Record emphasis is used 
  2175. extensively to provide visual feedback on the progress of operations. It also 
  2176. has a very easy point and click method for using paths to perform all the usual 
  2177. file operations. 
  2178.  
  2179. FileStar is multithreaded and supports running different operations in its two 
  2180. windows simultaneously.  For instance, you may be copying all the files in 
  2181. G:\WHATEVER to F:\THISDIR in one file window and at the same time be zipping 
  2182. all the files in D:\BACKUP in the other.  You may also perform other operations 
  2183. that don't require a window, such as format floppies, while the copy and zip 
  2184. jobs are in progress. 
  2185.  
  2186. Capabilities Summary 
  2187.  
  2188. Presented below are the drive and file capabilities of FileStar. Salient 
  2189. features or limitations are also noted. 
  2190.  
  2191. The following operations may be performed on individual files or a selected 
  2192. list of files: 
  2193.  
  2194.        -  Copy (Drag and drop or point and click dialog) 
  2195.        -  Move (Drag and drop or point and click dialog) 
  2196.        -  Delete (Drag and drop on shredder or with/without confirm dialog) 
  2197.        -  Change attributes 
  2198.        -  Change last write date and time 
  2199.        -  Archive (point and click dialog using InfoZip's ZIP.EXE only) 
  2200.        -  Extract (point and click dialog using InfoZip's UNZIP.EXE only) 
  2201.  
  2202.   The following operations may be performed only on individual files: 
  2203.  
  2204.        -  Rename (long file name entry field) 
  2205.        -  Print (ASCII only) 
  2206.        -  Edit (ASCII, ICO, BMP extensions using external editors) 
  2207.        -  View (ASCII, INF, ZIP and 10 graphic file extensions using external 
  2208.       browsers) 
  2209.        -  Execute (double click EXE, COM, CMD, BAT extensions or use smart 
  2210.       dialog) 
  2211.  
  2212.   The following directory operations may be performed: 
  2213.  
  2214.        -  Create 
  2215.        -  Delete 
  2216.        -  Rename 
  2217.        -  Move (within the drive partition) 
  2218.        -  Query (directory statistics) 
  2219.        -  Directories accept drag and drop files from the associated file 
  2220.       window. 
  2221.  
  2222.   The following operations may be performed on drives: 
  2223.  
  2224.        -  Format (using PMFORMAT) 
  2225.        -  CheckDisk (using PMCHKDSK) 
  2226.        -  Query (disk and media characteristics) 
  2227.        -  Find all files matching mask 
  2228.        -  Find text (using PMSEEK) 
  2229.       Other Features 
  2230.  
  2231.       FileStar has other noteworthy features such as a Settings Notebook for 
  2232.       setting user options, a message system that saves session messages, 
  2233.       configurable windows, seven popup menus, removable menu and/or button 
  2234.       bar, user entry fields sized for long file names, swap file data display, 
  2235.       selected file data windows, system drive used/free data windows, and the 
  2236.       ability to pop up OS/2 and DOS windows in the current directory using the 
  2237.       installed command processors. It can execute DOS, OS/2 or Windows files 
  2238.       with double click selection or a smart dialog (that identifies the type 
  2239.       of file) may be used to select full screen or windowed sessions of the 
  2240.       executable file. The dialog saves the last 20 entries and also doubles as 
  2241.       an OS/2 command line. 
  2242.  
  2243.       The first release of FileStar has excellent archived file support using 
  2244.       InfoZip's ZIP.EXE and UNZIP.EXE which in turn supports OS/2 Extended 
  2245.       Attributes and is compatible with Version 2 PKZIP compression software. 
  2246.       The InfoZip products are widely available and are free. 
  2247.  
  2248.       How to Register 
  2249.  
  2250.       You may register FileStar at the present time only by direct mail order 
  2251.       to Sierra HyperStar Software.  Submit the order form contained herein 
  2252.       along with payment by check or money order. 
  2253.  
  2254.       Support 
  2255.  
  2256.       Customer Support for FileStar is via CompuServe.  When logged in to 
  2257.       CompuServe, GO OS2BVEN. 
  2258.  
  2259.       Internet users may leave the author personal email on CIS. Others users 
  2260.       may leave email for the author on the FidoNet addressed to Jim 
  2261.       Read@>1:124/6300. 
  2262.  
  2263.  
  2264. ΓòÉΓòÉΓòÉ 9.1. Order Form ΓòÉΓòÉΓòÉ
  2265.  
  2266. Date:   /   / 
  2267.  
  2268. Remit payment to:  J. A. Read 
  2269.  
  2270. .          1427 Dominion Drive 
  2271.  
  2272. .          Dallas, Tx 75208 
  2273.  
  2274. .          (214) 946-8245 
  2275.  
  2276. Payment form: Only Check or Money Order currently accepted 
  2277.  
  2278. Price - $35.00 USD per License................Qty..Price x Qty 
  2279.  
  2280. FileStar/2 OS/2 File Manager current version  ____  _________ 
  2281.  
  2282. Sub-Total.......................................... _________ 
  2283.  
  2284. Texas Residents add applicable sales tax........... _________ 
  2285.  
  2286. Total.............................................. _________ 
  2287.  
  2288. Check Disk size:     3 1/2"_____ 5 1/4"_____ 
  2289.  
  2290. Signature: __________________________________________________ 
  2291.  
  2292. Name: _______________________________________________________ 
  2293.  
  2294. Addr: _______________________________________________________ 
  2295.  
  2296. City: ________________________ State: ________ Zip: _________ 
  2297.  
  2298. Phone: (______) ______________ Fax:  (______) _______________ 
  2299.  
  2300. Source of shareware copy you evaluated: _____________________ 
  2301.  
  2302. Your suggestions for improvement (use reverse side for more) 
  2303.  
  2304. _____________________________________________________________ 
  2305.  
  2306. _____________________________________________________________ 
  2307.  
  2308. _____________________________________________________________ 
  2309.  
  2310. _____________________________________________________________ 
  2311.  
  2312.  
  2313. ΓòÉΓòÉΓòÉ 10. Program Registration ΓòÉΓòÉΓòÉ
  2314.  
  2315. How To Register The Program 
  2316.  
  2317. A registration number from Sierra HyperStar Software is required to register 
  2318. the program. When registered, the startup delay with the About panel is 
  2319. bypassed. Additionally, the unregistered messages are eliminated. Most of all, 
  2320. you are legally entitled to use the program  on an unlimited basis. See How To 
  2321. Order for instructions on purchasing FileStar. 
  2322.  
  2323. If you have a registration number, press Register. This will call another 
  2324. dialog in which you enter your registered name and registration number. When 
  2325. both are correctly entered, you will be told to press Thank You which will save 
  2326. the registration data in the FILESTAR.INI file. If you ever erase this file, 
  2327. you will have to re-enter the data so be sure and keep a copy of you 
  2328. registration number in a safe place.